#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <WiFi.h>
#include <HTTPClient.h>

#define SCREEN_WIDTH 128 // OLED width,  in pixels
#define SCREEN_HEIGHT 64 // OLED height, in pixels
#define LED_PIN 13

const char* ssid = "Wokwi-GUEST";
const char* password = "";

const String url = "http://220.135.119.51:5000/inc?name=vegnutt";

// create an OLED display object connected to I2C
Adafruit_SSD1306 oled(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, -1);
HTTPClient http;

String payload;
String str;

void setup() {
  Serial.begin(9600);
  WiFi.begin(ssid, password);

  Serial.print("Connecting to WiFi");
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.print("OK! IP=");
  Serial.println(WiFi.localIP());

  Serial.print("Fetching " + url + "... ");
  pinMode(LED_PIN, OUTPUT);
  // initialize OLED display with I2C address 0x3C
}

void loop() {
  http.begin(url);
  

  int httpResponseCode = http.GET();
  if (httpResponseCode > 0) {
    Serial.print("HTTP ");
    Serial.println(httpResponseCode);
    payload = http.getString();
    Serial.println();
    Serial.println(payload);
  }
  else {
    Serial.print("Error code: ");
    Serial.println(httpResponseCode);
    Serial.println(":-(");
  }
  if(payload=="on") {     
    digitalWrite(LED_PIN, HIGH);
  }else digitalWrite(LED_PIN, LOW);


  if (!oled.begin(SSD1306_SWITCHCAPVCC, 0x3C)) {
    Serial.println(F("failed to start SSD1306 OLED"));
    while (1);
  }

  str = payload.substring(0);

  delay(5000);         // wait two seconds for initializing
  oled.clearDisplay(); // clear display

  oled.setTextSize(1);         // set text size
  oled.setTextColor(WHITE);    // set text color
  oled.setCursor(0, 2);       // set position to display (x,y)
  oled.println(str); // set text
  oled.display();              // display on OLED
}