/*******************************************************************
 *  An example of how to use a custom reply keyboard markup.       *
 *                                                                 *
 *                                                                 *
 *  written by Brian Lough                                         *
 *******************************************************************/
#include <WiFiClientSecure.h>
#include <UniversalTelegramBot.h>

// Wifi network station credentials
#define WIFI_SSID "Wokwi-GUEST"
#define WIFI_PASSWORD ""
// Telegram BOT Token (Get from Botfather)
#define BOT_TOKEN "7140797400:AAFAccuuiMSUmd6sFpFoR1xbyvzxJaTeiqM"


#define chat_id_input "660118994"

const unsigned long BOT_MTBS = 1000; // mean time between scan messages
const int ledPin = 13;

WiFiClientSecure secured_client;
UniversalTelegramBot bot(BOT_TOKEN, secured_client);
unsigned long bot_lasttime;          // last time messages' scan has been done
int ledStatus = 0;

void handleNewMessages(int numNewMessages)
{
  Serial.println("handleNewMessages");
  Serial.println(String(numNewMessages));

  for (int i = 0; i < numNewMessages; i++)
  {
    String chat_id = bot.messages[i].chat_id;
    String text = bot.messages[i].text;

    String from_name = bot.messages[i].from_name;
    if (from_name == "")
      from_name = "Guest";

    if (text == "/ledon")
    {
      digitalWrite(ledPin, HIGH); // turn the LED on (HIGH is the voltage level)
      ledStatus = 1;
      bot.sendMessage(chat_id, "Led is ON", "");
    }

    if (text == "/ledoff")
    {
      ledStatus = 0;
      digitalWrite(ledPin, LOW); // turn the LED off (LOW is the voltage level)
      bot.sendMessage(chat_id, "Led is OFF", "");
    }

    if (text == "/status")
    {
      if (ledStatus)
      {
        bot.sendMessage(chat_id, "Led is ON", "");
      }
      else
      {
        bot.sendMessage(chat_id, "Led is OFF", "");
      }
    }

    if (text == "/options")
    {
      String keyboardJson = "[[\"/ledon\", \"/ledoff\"],[\"/status\"]]";
      bot.sendMessageWithReplyKeyboard(chat_id, "Choose from one of the following options", "", keyboardJson, true);
    }

    if (text == "/start")
    {
      String welcome = "Welcome to Universal Arduino Telegram Bot library, " + from_name + ".\n";
      welcome += "This is Reply Keyboard Markup example.\n\n";
      welcome += "/ledon : to switch the Led ON\n";
      welcome += "/ledoff : to switch the Led OFF\n";
      welcome += "/status : Returns current status of LED\n";
      welcome += "/options : returns the reply keyboard\n";
      bot.sendMessage(chat_id, welcome, "Markdown");
    }
  }
}

void setup()
{
  Serial.begin(115200);

  // Set WiFi to station mode and disconnect from an AP if it was Previously connected
  WiFi.mode(WIFI_STA);
  WiFi.disconnect();
  delay(100);

  // attempt to connect to Wifi network:
  Serial.print("Connecting to Wifi SSID ");
  Serial.print(WIFI_SSID);
  Serial.print(" ");
  WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
  while (WiFi.status() != WL_CONNECTED)
  {
    Serial.print(".");
    delay(500);
  }
  Serial.println();

  Serial.print("WiFi connected. IP address: ");
  Serial.println(WiFi.localIP());

  bot.sendMessage(chat_id_input, "HOLA", "");
  
  pinMode(ledPin, OUTPUT); // initialize digital ledPin as an output.
  delay(10);
  digitalWrite(ledPin, HIGH); // initialize pin as off



  
}

void loop()
{
  if (millis() - bot_lasttime > BOT_MTBS)
  {
    int numNewMessages = bot.getUpdates(bot.last_message_received + 1);

    while (numNewMessages)
    {
      Serial.println("got response");
      handleNewMessages(numNewMessages);
      numNewMessages = bot.getUpdates(bot.last_message_received + 1);
    }

    bot_lasttime = millis();
  }
}