// Stepper motor on Wokwi!
#include <Stepper.h>
const int stepsPerRevolution = 40; // change this to fit the number of steps per revolution
// for your motor
// initialize the stepper library on pins 8 through 11:
Stepper myStepper(stepsPerRevolution, 12,14 , 27, 26);
void setup() {
// set the speed at 60 rpm:
myStepper.setSpeed(100);
// initialize the serial port:
Serial.begin(9600);
}
void loop() {
// step one revolution in one direction:
Serial.println("clockwise");
myStepper.step(stepsPerRevolution);
}