#include <IRremote.h>
#include <Servo.h>
#include <FastLED.h>

CRGB leds[0];
int pin_receiver = 2;
int button_value = 0;
int brightness = 20;

Servo myservo1;
IRrecv receiver(pin_receiver);

void setup()
{
  receiver.enableIRIn();   
  myservo1.attach(10);
  Serial.begin(9600); 

  FastLED.addLeds<NEOPIXEL, 3>(leds, 1);
}

void loop()
{
  if (receiver.decode()) 
  {
    translateIR();
    receiver.resume();  
  }
}

void translateIR()
{
  button_value = receiver.decodedIRData.command;
  Serial.println(button_value);

  if (button_value == 226){
    Serial.println("Forward button - Open Door, Backward button - Close Door, 1 - Set light color to RED, 2 - Set light color to Green, 3 - Set light color to Blue , 4 - Blinking LED, Play - Control LED brightness, Power - Rest");
  }

  if (button_value == 144){
    myservo1.write(180);
    Serial.println("Door Opening");
  }

  if (button_value == 224){
    myservo1.write(0);
    Serial.println("Door closing");
  }

  if (button_value == 48){
    leds[1] = CRGB::Red;
    FastLED.show();
    Serial.println("Red LED");
  }

  if (button_value == 24){
    leds[1] = CRGB::LawnGreen;
    FastLED.show();
    Serial.println("Green LED");
  }

  if (button_value == 122){
    leds[1] = CRGB::DarkBlue;
    FastLED.show();
    Serial.println("Blue LED");
  }

  if (button_value == 16){

    for(int i = 0; i<=20; i++ ){
      leds[1] = CRGB(66, 202, 191);
      FastLED.show();
      delay(100);
      leds[1] = CRGB(114, 202, 66);
      FastLED.show();
      delay(100);
      leds[1] = CRGB(202, 123, 66);
      FastLED.show();
      delay(100);
    }
  }

  if (button_value == 168){
    brightness = brightness + 50;
    FastLED.setBrightness(brightness);
    FastLED.show();
  }

  if (button_value == 162){
    myservo1.write(90);
    FastLED.clear();
    FastLED.show();
    Serial.println("System Reset");
  }
}