// ATENÇÃO, ANTES DE SUBIR O CODIGO PARA O ARDUINO INSTALE AS BIBLIOTECAS ABAIXO: WIRE, KEYPAD E LIQUID CRYSTAL

#include <Wire.h> 
#include <Keypad.h>
//#include <LiquidCrystal_I2C.h>
#include <LiquidCrystal.h>


//LiquidCrystal_I2C lcd(0x38,16,2);
LiquidCrystal lcd(7, 6, 5, 4, 3, 2);
const byte ROWS = 4; //four rows
const byte COLS = 4; //three columns
char keys[ROWS][COLS] = {
  {'1','2','3','a'}
  ,
  {'4','5','6','b'}
  ,
  {'7','8','9','c'}
  ,
  {'*','0','#','d'}
};

byte rowPins[ROWS] = {
  12, 13, A5, A4}; //connect to the row pinouts of the keypad
byte colPins[COLS] = {
  A3, A2, A1, A0
}; //connect to the column pinouts of the keypad

Keypad keypad = Keypad( makeKeymap(keys), rowPins, colPins, ROWS, COLS );

char codeInput[8];
byte time[4];
boolean refresh=true;//1 refresh one time...
char password[8];
int key=-1;
char lastKey;
char var;
boolean passwordEnable=false;

//Buttons for lcd shield
char BT_RIGHT = '4';
char BT_UP = 'a';
char BT_DOWN = 'b';
char BT_LEFT = '6';
char BT_SEL = 'd';   // Ok key  
char BT_CANCEL = 'c';
char BT_DEFUSER = 'x';   // not implemented

//leds

const int REDLED = 11;
const int ORANGELED = 8;
const int GREENLED = 10;
//const int BLUELED = 12;
//RELAYPIN
boolean relayEnable = false;
const int RELAYPIN = 9;
//IS VERY IMPORTANT THAT YOU TEST THIS TIME. BY DEFAULT IS IN 1 SEC. THAT IS NOT TOO MUCH. SO TEST IT!
const int RELAY_TIME = 5000;

//TIME INTS
int GAMEHOURS = 0;
int GAMEMINUTES = 45;
int BOMBMINUTES = 4;
int ACTIVATESECONDS = 5;

boolean endGame = false;

boolean sdStatus = false; //search and destroy game enable used in config
boolean saStatus = false; //same but SAbotaghe
boolean doStatus = false; //for DEmolition
boolean start = true;
boolean defusing;
boolean cancelando;
// SOUND TONES
boolean soundEnable = true;
int alarmTone1 = 700;
int alarmTone2 = 2600;
int activeTone = 1330;
int errorTone = 100;

unsigned long iTime;
unsigned long timeCalcVar;
unsigned long redTime;
unsigned long greenTime;
unsigned long iZoneTime;//initial time for zone
byte team=0; // 0 = neutral, 1 = green team, 2 = red team

void setup(){
  lcd.begin(16, 2);
  Serial.begin(9600);
  lcd.setCursor(3,0);
  lcd.print("BLUECORE TECH");// you can add your team name or someting cool
  lcd.setCursor(0,1);
  lcd.print(" AIRSOFT BOMB");// you can add your team name or someting cool
  keypad.setHoldTime(50);
  keypad.setDebounceTime(50);
  keypad.addEventListener(keypadEvent);

  //PinModes
  pinMode(ORANGELED, OUTPUT);   
  pinMode(GREENLED, OUTPUT);     
  pinMode(REDLED, OUTPUT); 
  pinMode(RELAYPIN, OUTPUT);  
  digitalWrite(RELAYPIN, HIGH);
  // CONFIGURE THE BARS OF PROGRESS BAR
  byte bar1[8] = {
    B10000,
    B10000,
    B10000,
    B10000,
    B10000,
    B10000,
    B10000,
    B10000,
  };
  byte bar2[8] = {
    B11000,
    B11000,
    B11000,
    B11000,
    B11000,
    B11000,
    B11000,
    B11000,
  };
  byte bar3[8] = {
    B11100,
    B11100,
    B11100,
    B11100,
    B11100,
    B11100,
    B11100,
    B11100,
  };
  byte bar4[8] = {
    B11110,
    B11110,
    B11110,
    B11110,
    B11110,
    B11110,
    B11110,
    B11110,
  };
  byte bar5[8] = {
    B11111,
    B11111,
    B11111,
    B11111,
    B11111,
    B11111,
    B11111,
    B11111,
  };
  byte up[8] = {
    B00000,
    B00100,
    B01110,
    B11111,
    B11111,
    B00000,
    B00000,
  };

  byte down[8] = {
    B00000,
    B00000,
    B11111,
    B11111,
    B01110,
    B00100,
    B00000,
  };
  lcd.createChar(0,bar1);
  lcd.createChar(1,bar2);
  lcd.createChar(2,bar3);
  lcd.createChar(3,bar4);
  lcd.createChar(4,bar5);
  lcd.createChar(5,up);
  lcd.createChar(6,down);
}

void loop(){
  menuPrincipal();
}
void keypadEvent(KeypadEvent key){
  switch (keypad.getState()){
    case RELEASED:
      switch (key){
         case 'd': defusing=false;
         break;
         case 'c': cancelando=false;
         break;
      }
    break;
    case HOLD:
      switch (key){
        case 'd': defusing= true;
        break;
        case 'c': cancelando=true;
        break;
      }
    break;
  }
}

  char* menu1[]={"Search&Destroy","Sabotage","Domination", "Configuration"      };
  char* menu2[]={"Game Config","Sound Config", "Relay Test", "Auto Test"      };   
  char* GAME_TIME="Game Time:";
  char* BOMB_TIME="Bomb Time:";
  char* ZERO_MINUTES="00 minutes";
  char* ARM_TIME="Arm Time:";
  char* ZERO_SECS="00 seconds";
  char* ENABLE_SOUND="Enable Sound?";
  char* YES_OR_NOT="A : Yes B : No";
  char* ENABLE_RELAYPIN="Enable Relay?";
  char* ENABLE_CODE="Enable Code Arm?";
  char* GAME_TIME_TOP="GAME TIME";
  char* ARMING_BOMB = "ARMING BOMB";
  char* ENTER_CODE = "Enter Code";
  char* CODE_ERROR = "Code Error!";
  char* BOMB_ARMED = "BOMB ARMED";
  char* DETONATION_IN = "DETONATION IN";
  char* DISARMING = "DISARMING BOMB" ;
  char* DISARM = "DISARMING";
  char* GAME_OVER = " GAME OVER! ";
  char* DEFENDERS_WIN = " DEFENDERS WIN ";
  char* SABOTAGE_FAIL= "SABOTAGE FAIL!";

//##################MENUS###############################

void menuPrincipal(){   //MAIN MENU

  digitalWrite(GREENLED, LOW); 
  digitalWrite(REDLED, LOW); 

  //   if whe start a new game from another we need to restart propertly this variables
  saStatus=false;
  sdStatus=false;
  doStatus=false;
  //Draw menu
  cls();//clear lcd and set cursor to 0,0
  int i=0;
 // HERE YOU CAN ADD MORE ITEMS ON THE MAIN MENU
  lcd.print(menu1[i]);
  lcd.setCursor(15,1);
  checkArrows(i,2);
  while(1){

    var = keypad.waitForKey();
    if(var == BT_UP && i>0){
      i--;
      cls();
      lcd.print(menu1[i]);
      checkArrows(i,2);
      delay(50);
    }
    if(var == BT_DOWN && i<2){
      i++;
      cls(); 
      lcd.print(menu1[i]);    
      checkArrows(i,2);
      delay(50);
    }

    if(var == BT_SEL){
      cls();
      switch (i){

      case 0:
        sdStatus=true;
        configQuickGame();
        startGameCount();
        search();
        break;
      case 1: 
        saStatus=true;
        configQuickGame();
        startGameCount();
        sabotage();
        break;
      case 2:

        doStatus=true;
        configQuickGame();
        startGameCount();
        domination();
        break;
      case 3:
        config();
        break;

      }
    }
  }
}

void config(){
  //Draw menu
  lcd.clear();
  lcd.setCursor(0, 0);
  int i=0;
  
  delay(500);
  lcd.print(menu2[i]);
  checkArrows(i,3);

  while(1){
    var=keypad.waitForKey();
    if(var == BT_UP && i>0){
      i--;
      lcd.clear();  
      lcd.print(menu2[i]);
      checkArrows(i,3);
      delay(50);

    }
    if(var == BT_DOWN && i<3){
      i++;
      lcd.clear();  
      lcd.print(menu2[i]);
      checkArrows(i,3);
      delay(50);
    }
    if(var == BT_CANCEL){
      menuPrincipal();
    }
    if(var == BT_SEL){
      lcd.clear();
      switch (i){

      case 0:
        //gameConfigMenu();
        break;

      case 1:
        //soundConfigMenu();
        break;

      case 2:
        cls();
        lcd.print("RELAYPIN ON!");
        digitalWrite(RELAYPIN, LOW);   // turn the LED on (HIGH is the voltage level)
        delay(4000);   // wait for 4 second
        cls();
        lcd.print("RELAYPIN OFF!");
        digitalWrite(RELAYPIN, HIGH);
        delay(2000);
        config();
        break;        

      }
    }
  }
}

void configQuickGame(){

  cls();
  //GAME TIME
  if(sdStatus || doStatus || saStatus){
    menu1:
    cls();
    lcd.print(GAME_TIME);
    delay(100);
    lcd.setCursor(0,1);
    lcd.print("00:00 hh:mm");
    lcd.cursor();
    lcd.blink();
    lcd.setCursor(0,1);
    byte var2=0;
    for(int i=0;i<4;i++){ 
      while(1){
        if(i==2 && var2==0){
          lcd.print(":");
          var2=1;
        }

        byte varu= getRealNumber();
        if(varu !=11){

          time[i] =  varu;
          Serial.print(varu);


          lcd.print(varu);


          break;
        }
      }  
    }
    lcd.noCursor();
    lcd.noBlink();
    lcd.setCursor(13,1);
    lcd.print("ok?");
    //zona donde pasamos los items a
    //redibujar
    while(1){
      var = keypad.waitForKey();
      if(var == 'd') // Accept
      {

        GAMEMINUTES= ((time[0]*600)+(time[1]*60)+(time[2]*10)+(time[3]));
        break;
      }    
  if(var == 'c') // Cancel or Back Button :')
      {

        goto menu1;
      }           
    }

    cls();
  }
  //BOMB TIME
  if(sdStatus || saStatus){
 
    menu2:
    cls();
    lcd.print(BOMB_TIME);
    delay(100);
    lcd.setCursor(0,1);
    lcd.print(ZERO_MINUTES);
    lcd.cursor();
    lcd.blink();
    lcd.setCursor(0,1);
    for(int i=0;i<2;i++){ 
      while(1){
        byte varu= getRealNumber();
        if(varu !=11){
          time[i] =  varu;
          lcd.print(varu);

          break;
        }
      }  
    }
    lcd.noCursor();
    lcd.noBlink();   
    lcd.setCursor(13,1);
    lcd.print("ok?");
    //zona donde pasamos los items a
    //redibujar
    while(1){
      var = keypad.waitForKey();
      if(var == 'd') //
      {

        BOMBMINUTES= ((time[0]*10)+(time[1]));
        break;
      }    
  if(var == 'c') // Cancel or Back Button :')
      {

        goto menu2;
      }           
    }

    cls();
  }
  cls();
  //ARMING TIME
  if(sdStatus || doStatus || saStatus){
        
    menu3:
    cls();
    lcd.print(ARM_TIME);
    delay(100);
    lcd.setCursor(0,1);
    lcd.print(ZERO_SECS);
    lcd.cursor();
    lcd.blink();
    lcd.setCursor(0,1);
    for(int i=0;i<2;i++){ 
      while(1){
        byte varu= getRealNumber();
        if(varu !=11){
          time[i] =  varu;
          lcd.print(varu);

          break;
        }
      }  
    }
    lcd.noCursor();
    lcd.noBlink(); 
    lcd.setCursor(13,1);
    lcd.print("ok?");  
    
    //zona donde pasamos los items a
    //redibujar
    while(1){
      var = keypad.waitForKey();
      if(var == 'd') // Accept
      {

        ACTIVATESECONDS= ((time[0]*10)+(time[1]));
        break;
      }    
  if(var == 'c') // Cancel or Back Button :')
      {

        goto menu3;
      }           
    }

    cls();
  }
 
  //Activate RELAY at Terrorist game ends??? Boom!

  if(sdStatus || saStatus){
    cls();
    lcd.print(ENABLE_RELAYPIN);
    lcd.setCursor(0,1);
    lcd.print(YES_OR_NOT);
    while(1)
    {
      var = keypad.waitForKey();
      if(var == 'a' ){
        relayEnable=true;

        break;
      }  
      if(var == 'b' ){
        relayEnable=false;

        break;
      }  
    } 
  }
  //You Want a password enable-disable game?
  if(sdStatus || saStatus){
    cls();
    lcd.print(ENABLE_CODE);
    lcd.setCursor(0,1);
    lcd.print(YES_OR_NOT);

    while(1)
    {
      var = keypad.waitForKey();
      if(var == 'a' ){

        setNewPass();
        passwordEnable = true;
        break;
      }  
      if(var == 'b' ){

        passwordEnable = false;
        break;
      }  
    } 

  }  
  //Continue the game :D
}






//This fuction compare codeInput[8] and password[8] variables
boolean comparePassword(){

  for(int i=0;i<8;i++){
    if(codeInput[i]!=password[i])return false;
  }
  return true;
}

//Set the password variable
void setCode(){

  lcd.setCursor(0, 1);
  for(int i=0;i<8;i++){
    while(1){
      var= getNumber();
      if(var !='x'){
        codeInput[i] = var;

        if (i != 0){
          lcd.setCursor(i-1,1);
          lcd.print("*");
          lcd.print(var);
        }
        else
        {
          lcd.print(var);
        }

        break;
      }
    }
  }
}
void setCodeTime(){

  timeCalcVar=millis();

  for(int i=0;i<8;i++){
    while(1){
      if(ACTIVATESECONDS*1000+timeCalcVar-millis()<=100){
        codeInput[i]='x';
        break;
      }

      lcd.setCursor(11,0);
      printTimeDom(ACTIVATESECONDS*1000+timeCalcVar-millis(),false);

      var= getNumber();
      if(var !='x'){
        codeInput[i] = var;

        if (i != 0){
          lcd.setCursor(i-1,1);
          lcd.print("*");
          lcd.print(var);
        }
        else
        {
          lcd.print(var);
        }

        break;
      }
    }
  }
}
void setPass(){
  lcd.setCursor(0, 1);

  for(int i=0;i<8;i++){ 
    while(1){
      var= getNumber();
      if(var !='x'){
        password[i] =  var;
        if (i != 0){
          lcd.setCursor(i-1,1);
          lcd.print("*");
          lcd.print(var);
        }
        else
        {
          lcd.print(var);
        }

        break;
      }
    }  
  }
}

void setNewPass(){

  while(1){
    lcd.clear();
    lcd.setCursor(0, 0);
    lcd.print("Enter New Pass");
    setPass();

    lcd.clear();
    lcd.setCursor(0, 0);
    lcd.print("Retype Pass");

    setCode();

    if(comparePassword()){

      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print("Password Set OK!");
      delay(2000); 
      break; 
    }
    else {
      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print("ERROR Dont Match!");
      delay(2000); 

    }
  }
}
//Whait until a button is pressed is is a number return the number 'char' if not return x



char getNumber(){
  while(1){
    var = keypad.getKey();
    if (var){//
      switch (var) {
      case 'a': 
        return 'x';
        break;
      case 'b': 
        return 'x';
        break;

      case 'c': 
        return 'x';
        break;
      case 'd': 
        return 'x';
        break;
      case '*': 
        return 'x';
        break;
      case '#': 
        return 'x';
        break;
      default:
        return var;
        break;
      }
    }
    return 'x';
  }
}

byte getRealNumber(){

  while(1){
    var = keypad.waitForKey();

    if (var){//
      switch (var) {
      case '1': 
        return 1;
        break;
      case '2': 
        return 2;
        break;

      case '3': 
        return 3;
        break;
      case '4': 
        return 4;
        break;
      case '5': 
        return 5;
        break;
      case '6': 
        return 6;
      case '7': 
        return 7;
        break;
      case '8': 
        return 8;
        break;
      case '9': 
        return 9;
        break;
        case '0': 
        return 0;
        break;
        
      default:
        return 11;
        break;
      }

    }
    return 11;
  }
}







//void getConfig(){
//
////Check first time 
//
//if (EEPROM.read(0)!= 1){
////write default config values
//
//
//
//}
//  
////RELAY_TIME = EEPROM.read(1) * 1000 ;
//
//  
//}

void drawBar(byte porcent){
  //TODO: Optimize this code 
  int box=(8*porcent)/10;
  lcd.setCursor(0,1);
  while(box>=5){
    if(box>=5)
    {
      lcd.write(4);
      box-=5;
    }
  }
    switch(box){
    case 0:
      break;
    case 1:
      lcd.write((uint8_t)0);
      break;
    case 2:
      lcd.write(1);
      break;
    case 3:
      lcd.write(2);
      break;
    case 4:
      lcd.write(3);
      break;
    }
  

}
void cls(){
  lcd.clear();
  lcd.setCursor(0,0);
}

void printTime(unsigned long minutos, unsigned long aTiempo){

  timeCalcVar=minutos-aTiempo/60000;
  //Hours
  
  if(timeCalcVar/60==0 && refresh){
      lcd.clear();
      refresh=false;
      //delay(100);
      lcd.setCursor(3,1);
      Serial.println("!!!!");
  }
   
  if(timeCalcVar/60>=1){
    
    if(timeCalcVar/60<10)
  {
    lcd.setCursor(2,1);
    lcd.print("0");
    lcd.print(timeCalcVar/60);
  }
  else
  {
    lcd.print(timeCalcVar/60);
  }
  
  lcd.print(":");
  
  }
  //minutes
  if(timeCalcVar%60<10)
  {
    lcd.print("0");
    lcd.print(timeCalcVar%60);
  }
  else
  {
    lcd.print(timeCalcVar%60);
  }
  lcd.print(":");
  //seconds
  timeCalcVar=aTiempo/1000;
  if(59-(timeCalcVar%60)<10)
  {
    lcd.print("0");
    lcd.print(59-(timeCalcVar%60));
  }
  else
  {
    lcd.print(59-(timeCalcVar%60));
  }
  lcd.print(":");
  //this not mach with real time, is just a effect, it says 999 because millis%1000 sometimes give 0 LOL
  lcd.print(999-(millis()%1000));
}

void printTimeDom(unsigned long aTiempo, boolean showMillis){
  //minutes
  if((aTiempo/60000)<10)
  {
    lcd.print("0");
    lcd.print(aTiempo/60000);
  }
  else
  {
    lcd.print(aTiempo/60000);
  }
  lcd.print(":");
  //seconds
  if(((aTiempo/1000)%60)<10)
  {
    lcd.print("0");
    lcd.print((aTiempo/1000)%60);
  }
  else
  {
    lcd.print((aTiempo/1000)%60);
  }
  if(showMillis){
    lcd.print(":");
    //this not mach with real time, is just a effect, it says 999 because millis%1000 sometimes give 0 LOL
      lcd.print(999-millis()%1000);

  }
}

void startGameCount(){
  lcd.clear();
  lcd.setCursor(1,0);
  lcd.print("Ready to Begin");
  lcd.setCursor(0,1);
  lcd.print("Push ANY Button");
  keypad.waitForKey();//if you press a button game start

  cls();
  lcd.setCursor(1,0);
  lcd.print("Starting Game");
  for(int i = 5; i > 0 ; i--){ // START COUNT GAME INIT
    lcd.setCursor(5,1);

    lcd.print("IN ");
    lcd.print(i);
    delay(1000);
  }
  cls();
}

void checkArrows(byte i,byte maxx ){

  if(i==0){
    lcd.setCursor(15,1);
    lcd.write(6); 
  }
  if(i==maxx){  
    lcd.setCursor(15,0);
    lcd.write(5);
  }
  if(i>0 && i<maxx){
    lcd.setCursor(15,1);
    lcd.write(6);
    lcd.setCursor(15,0);
    lcd.write(5);  
  }
}

void activateRelay(){

  digitalWrite(RELAYPIN, LOW);   // turn the LED on (HIGH is the voltage level)
  delay(RELAY_TIME); 
  digitalWrite(RELAYPIN, HIGH);

}



                   
  

void explodeSplash(){
  digitalWrite(REDLED, LOW);  
  digitalWrite(GREENLED, LOW); 
  cls();
  delay(100);
  endGame = false;
  lcd.setCursor(1,0);
  lcd.print("TERRORISTS WIN");
  lcd.setCursor(4,1);
  lcd.print("GAME OVER");
  digitalWrite(REDLED, HIGH);  
  for(int i = 200; i>0; i--)// this is the ultra hi definition explosion sound xD
  {

    delay(20);
  }

  if(relayEnable){
    activateRelay(); 
  }
  delay(5000);
  cls();

  //end code
  lcd.print("Play Again?");
  lcd.setCursor(0,1);
  lcd.print("A : Yes B : No");
  while(1)
  {
    var = keypad.waitForKey();
    if(var == 'a' ){

      //We have two options, search & destroy and sabotaje play again options so!
      if(sdStatus){
        startGameCount();
        search();
      }
      if(saStatus){
        saStatus=true;
        startGameCount();
        start=true; //to set iTime to actual millis() :D
        sabotage();
      }
    }  
    if(var == 'b' ){

      menuPrincipal();

      break;
    }  
  } 
}
void failSplash(){
  digitalWrite(REDLED, LOW);  
  digitalWrite(GREENLED, LOW); 
  cls();
  delay(100);
  endGame = false;
  lcd.setCursor(1,0);
  lcd.print("  TIME OUT");
  lcd.setCursor(4,1);
  lcd.print("GAME OVER");
  digitalWrite(GREENLED, HIGH);  
  digitalWrite(ORANGELED, LOW); 
  digitalWrite(REDLED, LOW); 
  for(int i = 200; i>0; i--)// this is the ultra hi definition explosion sound xD
  {

    delay(20);
  }

  if(relayEnable){
    activateRelay(); 
  }
  delay(5000);
  cls();

  //end code
  lcd.print("Play Again?");
  lcd.setCursor(0,1);
  lcd.print("A : Yes B : No");
  while(1)
  {
    var = keypad.waitForKey();
    if(var == 'a' ){

      //We have two options, search & destroy and sabotaje play again options so!
      if(sdStatus){
        startGameCount();
        search();
      }
      if(saStatus){
        saStatus=true;
        startGameCount();
        start=true; //to set iTime to actual millis() :D
        sabotage();
      }
    }  
    if(var == 'b' ){

      menuPrincipal();

      break;
    }  
  } 
}
void disarmedSplash(){
  endGame = false;
  digitalWrite(REDLED, LOW); 
  digitalWrite(GREENLED, LOW);
  if(sdStatus || saStatus){
    lcd.clear();
    lcd.setCursor(2,0);
    lcd.print("BOMB DISARMED");
    lcd.setCursor(3,1);
    lcd.print("GOODS WIN");
    digitalWrite(GREENLED, HIGH);  
    delay(5000);
    digitalWrite(GREENLED, LOW); 
  }
  //end code
  lcd.clear();
  lcd.print("Play Again?");
  lcd.setCursor(0,1);
  lcd.print("A : Yes B : No");
  digitalWrite(REDLED, LOW);  
  digitalWrite(GREENLED, LOW); 
  while(1)
  {
    var = keypad.waitForKey();
    if(var == 'a' ){

      //We have two options, search & destroy and sabotaje play again options so!
      if(sdStatus){
        startGameCount();
        search();
      }
      if(saStatus){
        saStatus=true;
        startGameCount();
        start=true; //to set iTime to actual millis() :D
        sabotage();
      }
    }  
    if(var == 'b' ){

      menuPrincipal();
      break;
    }  
  } 
}
void search() {
  refresh = true;
  cls();
  digitalWrite(ORANGELED, HIGH);
  digitalWrite(REDLED, LOW);
  digitalWrite(GREENLED, LOW);
  //SETUP INITIAL TIME
  int minutos = GAMEMINUTES - 1;
  unsigned long iTime = millis(); //  initialTime in millisec
  unsigned long aTime;
  //var='o';

  //Starting Game Code
  while (1) { // this is the important code, is a little messy but works good.

    //If you fail disarm.
    if (endGame) {
      failSplash();
    }

    //Code for led blinking
    timeCalcVar = (millis() - iTime) % 1000;
        if (timeCalcVar >= 0 && timeCalcVar <= 50)digitalWrite(ORANGELED, HIGH);
    if (timeCalcVar >= 90 && timeCalcVar <= 130)digitalWrite(ORANGELED, LOW);


    lcd.setCursor(3, 0);
    lcd.print(GAME_TIME_TOP);
    aTime = millis() - iTime;
    lcd.setCursor(3, 1);

    //PRINT TIME ON LCD

    printTime(minutos, aTime);

    //###########################CHECKINGS##################

    //Check If Game End
    if (minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0)failSplash();
    //Serial.println(keypad.getKey());
    //USED IN PASSWORD GAME
    if ('d' == keypad.getKey() && passwordEnable) {
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(ARMING_BOMB);
      delay(1000);//a little delay to think in the password
      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print(ENTER_CODE);

      setCodeTime();// we need to set the comparation variable first it writes on codeInput[]

      //then compare :D

      if (comparePassword()) destroy();
      lcd.clear();
      lcd.setCursor(3, 0);
      lcd.print(CODE_ERROR);
      delay(500);
      cls();
    }
    //Check If Is Activating
    while (defusing && !passwordEnable)
    {
      digitalWrite(GREENLED, LOW);
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(ARMING_BOMB);
      lcd.setCursor(0, 1);
      unsigned int percent = 0;
      unsigned long xTime = millis(); //start disabling time
      while (defusing)
      {
        keypad.getKey();
                percent = (millis() - xTime) / (ACTIVATESECONDS * 10);
                
        drawBar(percent);
        //check if game time runs out during the disabling
        aTime = millis() - iTime;
        Serial.println(millis()-xTime);
        if ((minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) || minutos - aTime / 60000 > 4000000000) {
          endGame = true;
        }
        timeCalcVar = (millis() - xTime) % 1000;

        if ( timeCalcVar >= 0 && timeCalcVar <= 40)
        {
          digitalWrite(REDLED, HIGH);

        }
        if (timeCalcVar >= 480 && timeCalcVar <= 520)
        {

          digitalWrite(REDLED, LOW);
        }



        if (percent >= 100)
        {
          digitalWrite(GREENLED, LOW);
          destroy();// jump to the next gamemode
        }
      }
      cls();
      digitalWrite(REDLED, LOW);

    }
  }
}

void destroy() {
  lcd.clear();
  lcd.setCursor(3, 0);
  lcd.print(BOMB_ARMED);
  delay(1000);
  int minutos = BOMBMINUTES - 1;
  unsigned long iTime = millis();
  unsigned long aTime;
  int largoTono = 50;

  //MAIN LOOP
  while (1) {

    //If you fail disarm.
    if (endGame) {
      explodeSplash();
    }

    //Led Blink

    timeCalcVar = (millis() - iTime) % 1000;
    if (timeCalcVar >= 0 && timeCalcVar <= 40)
    {
      digitalWrite(REDLED, HIGH);

    }
    if (timeCalcVar >= 180 && timeCalcVar <= 220) {
      digitalWrite(REDLED, LOW);
    }
    //Sound
    aTime = millis() - iTime;
    timeCalcVar = (millis() - iTime) % 1000;

    if ( minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) < 10)largoTono = 300;

    lcd.setCursor(1, 0);
    lcd.print(DETONATION_IN);
    //Passed Time

    lcd.setCursor(3, 1);

    ////////HERE ARE THE TWO OPTIONS THAT ENDS THE GAME///////////

    ////TIME PASED AWAY AND THE BOMB EXPLODES
    if (minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) // Check if game ends
    {
      explodeSplash();
    }
    //print time

    printTime(minutos, aTime);

    //// SECOND OPTION: YOU PRESS DISARMING BUTTON

    //IF IS A PASSWORD GAME

    if ('d' == keypad.getKey() && passwordEnable) {

      lcd.clear();
      lcd.setCursor(1, 0);
      lcd.print(DISARMING);
      delay(1000);//a little delay to think in the password

      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print(ENTER_CODE);

      setCodeTime();// we need to set the compare variable first

      //then compare :D

      if (comparePassword()) {
        disarmedSplash();
      }
      lcd.clear();
      lcd.setCursor(3, 0);
      lcd.print(CODE_ERROR);

      delay(500);
      cls();
    }

    if (defusing && !passwordEnable) // disarming bomb
    {
      lcd.clear();
      digitalWrite(REDLED, LOW);
      lcd.setCursor(3, 0);
      lcd.print(DISARM);
      lcd.setCursor(0, 1);
      unsigned int percent = 0;
      unsigned long xTime = millis();
      while (defusing)
      {
        keypad.getKey();
        //check if game time runs out during the disabling
        aTime = millis() - iTime;
        if ((minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) || minutos - aTime / 60000 > 4000000000) {
          endGame = true;
        }
        timeCalcVar = (millis() - xTime) % 1000;
        if (timeCalcVar >= 0 && timeCalcVar <= 20)
        {
          digitalWrite(GREENLED, HIGH);

        }
        if (timeCalcVar  >= 480 && timeCalcVar <= 500)
        {

          digitalWrite(GREENLED, LOW);
        }
        unsigned long seconds = (millis() - xTime);
        percent = seconds / (ACTIVATESECONDS * 10);
        drawBar(percent);

        //BOMB DISARMED GAME OVER
        if (percent >= 100)disarmedSplash();
      }
      digitalWrite(REDLED, LOW);
      digitalWrite(GREENLED, LOW);
      cls();
    }
  }
}



void sabotage() {
  endGame = false;
  refresh = true;
  cls();
  digitalWrite(REDLED, LOW);
  digitalWrite(GREENLED, LOW);
  //SETUP INITIAL TIME
  int minutos = GAMEMINUTES - 1;


  if (start) {
    iTime = millis(); //  initialTime of the game, use this because sabotage mode goes can return to sabotage()
    start = false;
  }

  unsigned long aTime;

  //Starting Game Code
  while (1) { // this is the important code, is a little messy but works good.

    if (endGame) {
      failSplash();
    }
    //Code for led blinking
    timeCalcVar = (millis() - iTime) % 1000;
    if (timeCalcVar >= 0 && timeCalcVar <= 50)digitalWrite(ORANGELED, HIGH);
    if (timeCalcVar >= 90 && timeCalcVar <= 130)digitalWrite(ORANGELED, LOW);

    lcd.setCursor(3, 0);
    lcd.print(GAME_TIME);
    aTime = millis() - iTime;
    lcd.setCursor(3, 1);

    //PRINT TIME ON LCD
    printTime(minutos, aTime);
    //###########################CHECKINGS##################

    //Check If Game End
    if (minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) {
      failSplash();
    }

    //USED IN PASSWORD GAME
    if ('d' == keypad.getKey() && passwordEnable) {
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(ARMING_BOMB);
      delay(1000);//a little delay to think in the password
      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print(ENTER_CODE);

      setCodeTime();// we need to set the compare variable first

      //then compare :D

      if (comparePassword()) {
        destroySabotage();
      }
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(CODE_ERROR);

      delay(500);
      cls();
    }

    //Check If Is Activating
    while (defusing && !passwordEnable)
    {
      keypad.getKey();
      cls();
      digitalWrite(GREENLED, LOW);
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(ARMING_BOMB);
      lcd.setCursor(0, 1);
      unsigned int percent = 0;
      unsigned long xTime = millis(); //start disabling time
      while (defusing)
      {
        keypad.getKey();
        //check if game time runs out during the disabling
        aTime = millis() - iTime;
        if ((minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) || minutos - aTime / 60000 > 4000000000)endGame = true;

        timeCalcVar = (millis() - xTime) % 1000;

        if ( timeCalcVar >= 0 && timeCalcVar <= 40)
        {
          digitalWrite(REDLED, HIGH);

        }
        if (timeCalcVar >= 480 && timeCalcVar <= 520)
        {

          digitalWrite(REDLED, LOW);
        }
        unsigned long seconds = millis() - xTime;
        percent = (seconds) / (ACTIVATESECONDS * 10);
        drawBar(percent);

        if (percent >= 100)
        {
          digitalWrite(GREENLED, LOW);
          destroySabotage();// jump to the next gamemode
        }
      }
      cls();
      digitalWrite(REDLED, LOW);
    }
  }
}

void destroySabotage() {
  endGame = false;
  lcd.clear();
  lcd.setCursor(3, 0);
  lcd.print(BOMB_ARMED);
  delay(1000);
  int minutos = BOMBMINUTES - 1;
  unsigned long iTime = millis();
  unsigned long aTime;
  int largoTono = 50;

  //MAIN LOOP
  while (1) {

    //If you fail disarm.
    if (endGame) {
      explodeSplash();
    }

    //Led Blink

    timeCalcVar = (millis() - iTime) % 1000;
    if (timeCalcVar >= 0 && timeCalcVar <= 40)
    {
      digitalWrite(REDLED, HIGH);

    }
    if (timeCalcVar >= 180 && timeCalcVar <= 220) {
      digitalWrite(REDLED, LOW);
    }
    //Sound

    timeCalcVar = (millis() - iTime) % 1000;
    aTime = millis() - iTime;
  
    if ( minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) < 10)largoTono = 300;

    lcd.setCursor(1, 0);
    lcd.print(DETONATION_IN);
    //Passed Time

    lcd.setCursor(3, 1);

    ////////HERE ARE THE TWO OPTIONS THAT ENDS THE GAME///////////

    ////TIME PASED AWAY AND THE BOMB EXPLODES
    if (minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) // Check if game ends
    {
      failSplash();
    }
    //print time
    printTime(minutos, aTime);

    //// SECOND OPTION: YOU PRESS DISARMING BUTTON

    //IF IS A PASSWORD GAME

    if ('d' == keypad.getKey() && passwordEnable) {

      cls();
      digitalWrite(REDLED, LOW);
      digitalWrite(GREENLED, HIGH);
      lcd.print(DISARMING);
      delay(1000);//a little delay to think in the password

      lcd.clear();
      lcd.setCursor(0, 0);
      lcd.print(ENTER_CODE);

      setCodeTime();// we need to set the compare variable first

      //then compare :D

      if (comparePassword()) {
        sabotage();
      }
      lcd.clear();
      lcd.setCursor(2, 0);
      lcd.print(CODE_ERROR);

      delay(500);
      cls();
    }

    if (defusing && !passwordEnable) // disarming bomb
    {
      lcd.clear();
      digitalWrite(REDLED, LOW);
      lcd.setCursor(3, 0);
      lcd.print(DISARM);
      lcd.setCursor(0, 1);
      unsigned int percent = 0;
      unsigned long xTime = millis();
      while (defusing)
      {
        keypad.getKey();
        //check if game time runs out during the disabling
        aTime = millis() - iTime;
        if ((minutos - aTime / 60000 == 0 && 59 - ((aTime / 1000) % 60) == 0) || minutos - aTime / 60000 > 4000000000) {
          endGame = true;
        }

        timeCalcVar = (millis() - xTime) % 1000;
        if (timeCalcVar >= 0 && timeCalcVar <= 20)
        {
          digitalWrite(GREENLED, HIGH);

        }
        if (timeCalcVar >= 480 && timeCalcVar <= 500)
        {

          digitalWrite(GREENLED, LOW);
        }
        unsigned long seconds = (millis() - xTime);
        percent = seconds / (ACTIVATESECONDS * 10);
        drawBar(percent);

        //BOMB DISARMED RETURN TO SABOTAGE
        if (percent >= 100)
        {
          cls();
          lcd.print("Bomb Disarmed");
          delay(1000);
          sabotage();
        }
      }
      digitalWrite(REDLED, LOW);
      digitalWrite(GREENLED, LOW);
      cls();
    }
  }
}














void domination(){

  //SETUP INITIAL TIME 
  int minutos = GAMEMINUTES-1;
  boolean showGameTime=true;
  unsigned long a;
  unsigned long iTime=millis(); //  initialTime in millisec 
  unsigned long aTime;
 
  team=0;
  iZoneTime=0;
  aTime=0;
  redTime=0;
  greenTime=0;

  int largoTono = 50;
  // 0 = neutral, 1 = green team, 2 = red team
  a=millis();
  //Starting Game Code
  while(1)  // this is the important code, is a little messy but works good.
  {
    if(endGame){
      gameOver();
    }
    
    keypad.getKey();
    aTime=millis()- iTime;
    //Code for led blinking
    timeCalcVar=(millis()- iTime)%1000;
    if(timeCalcVar >= 0 && timeCalcVar <= 40)
    {
      if(team==1)digitalWrite(GREENLED, HIGH);  
      if(team==2)digitalWrite(REDLED, HIGH);  
    }
    if(timeCalcVar >= 50 && timeCalcVar <= 100)
    {    
      if(team==1)digitalWrite(GREENLED, LOW);  
      if(team==2)digitalWrite(REDLED, LOW);
    }
    // Sound!!! same as Destroy 

    //Help to count 3 secs
    if(a+2000<millis()){
      a=millis();   
      showGameTime=!showGameTime;
      cls();
    }
    //THE NEXT TO METHODS SHOW "GAME TIME" AND "CONTROLED ZONE TIME" IT SHOWS 2 AND 2 SEC EACH

    if(showGameTime){ //THE SECOND IS /2
      lcd.setCursor(3,0);
      lcd.print("GAME TIME");
      lcd.setCursor(3,1);
      printTime(minutos, aTime);
    }
    else if (!showGameTime){

      lcd.setCursor(2,0);
      if(team == 0)lcd.print("NEUTRAL ZONE");
      if(team == 1)lcd.print(" GREEN ZONE");
      if(team == 2)lcd.print("  RED ZONE");

      if(team>0){
        lcd.setCursor(3,1);
        printTimeDom(millis()-iZoneTime,true);
      }
    }

    //###########################CHECKINGS##################

    //Check If Game End
    if(minutos-aTime/60000==0 && 59-((aTime/1000)%60)==0)
    {
      gameOver();
    }

    //Check If IS neutral
    while((defusing || cancelando) && team > 0)
    {
      cls();
      if(team>0)lcd.print("NEUTRALIZING...");
      digitalWrite(ORANGELED, HIGH);
      lcd.setCursor(0,1);
      unsigned int percent=0;
      unsigned long xTime=millis(); //start disabling time
      while(defusing || cancelando)
      {
        //check if game time runs out during the disabling
        aTime= millis()- iTime;
        if((minutos-aTime/60000==0 && 59-((aTime/1000)%60)==0) || minutos-aTime/60000>4000000000){ 
          endGame = true;
        }
        
        keypad.getKey();
        timeCalcVar = (millis()- xTime)%1000;

        if( timeCalcVar >= 0 && timeCalcVar <= 20)
        {

        }
        if(timeCalcVar >= 480 && timeCalcVar <= 500)
        {

          digitalWrite(REDLED, LOW);
        }

        unsigned long seconds= millis() - xTime;
        percent = (seconds)/(ACTIVATESECONDS*10);
        drawBar(percent);

        if(percent >= 100)
        {
          delay(1000);

          if(team==1){ 
            greenTime+=millis()-iZoneTime;
            iZoneTime=0; 

          }
          if(team==2){ 
            redTime+=millis()-iZoneTime;
            iZoneTime=0; 
          }
          team=0;
          break;
        }
      }
      cls();
    }

    //Capturing red

    while(defusing && team == 0 )
    {
      cls();
      if(team==0)lcd.print(" CAPTURING ZONE");
      digitalWrite(ORANGELED, LOW);
      lcd.setCursor(0,1);
      unsigned int percent=0;
      unsigned long xTime=millis(); //start disabling time
      while(defusing)
      {
        keypad.getKey();
        //check if game time runs out during the disabling
        aTime= millis()- iTime;
        if((minutos-aTime/60000==0 && 59-((aTime/1000)%60)==0) || minutos-aTime/60000>4000000000){ 
          endGame = true;
        }
        timeCalcVar = (millis()- xTime)%1000;

        if( timeCalcVar >= 0 && timeCalcVar <= 20)
        {
          digitalWrite(REDLED, HIGH);  

        }
        if(timeCalcVar >= 480 && timeCalcVar <= 500)
        {

          digitalWrite(REDLED, LOW);
        }

        unsigned long seconds= millis() - xTime;
        percent = (seconds)/(ACTIVATESECONDS*10);
        drawBar(percent);

        if(percent >= 100)
        {
          digitalWrite(GREENLED, LOW);
          team=2;
          iZoneTime=millis();
          delay(1000);
          break;
        }
      }
      cls();
      digitalWrite(REDLED, LOW);
    }

    //getting to green zone
    while(cancelando && team == 0 )
    {
      cls();
      if(team==0)lcd.print(" CAPTURING ZONE");
      digitalWrite(ORANGELED, LOW);
      lcd.setCursor(0,1);
      unsigned int percent=0;
      unsigned long xTime=millis(); //start disabling time
      while(cancelando)
      {
        keypad.getKey();
        //check if game time runs out during the disabling
        aTime= millis()- iTime;
        if((minutos-aTime/60000==0 && 59-((aTime/1000)%60)==0) || minutos-aTime/60000>4000000000){ 
          endGame = true;
        }
        timeCalcVar = (millis()- xTime)%1000;

        if( timeCalcVar >= 0 && timeCalcVar <= 20)
        {
          digitalWrite(GREENLED, HIGH);  

        }
        if(timeCalcVar >= 480 && timeCalcVar <= 500)
        {

          digitalWrite(GREENLED, LOW);
        }

        unsigned long seconds= millis() - xTime;
        percent = (seconds)/(ACTIVATESECONDS*10);
        drawBar(percent);

        if(percent >= 100)
        {
          digitalWrite(GREENLED, LOW);
          team=1;
          iZoneTime=millis();
          delay(1000);
          break;
        }
      }
      cls();
      digitalWrite(GREENLED, LOW);  
    }
  }
}

void gameOver(){

  if(team==1)greenTime+=millis()-iZoneTime;
  if(team==2)redTime+=millis()-iZoneTime;
  digitalWrite(GREENLED, LOW);
  digitalWrite(REDLED, LOW);
  while(!defusing){
    keypad.getKey();
    if(defusing){
      keypad.getKey();
      break;
    }
    lcd.clear();
    lcd.setCursor(3,0);
    lcd.print("TIME OVER!");
    lcd.setCursor(0,1);

    //check who team win the base
    if(greenTime>redTime){
      //greenteam wins
      lcd.print(" GREEN TEAM WINS");
      digitalWrite(GREENLED, HIGH);
    }
    else{
      //redteam wins 
      lcd.print("  RED TEAM WINS");
      digitalWrite(REDLED, HIGH);
    }
    delay(3000);
    keypad.getKey();
    if(defusing){
      keypad.getKey();
      break;
    }
    cls();
    lcd.print("Red Time:");
    lcd.setCursor(5,1);
    printTimeDom(redTime,false);
    delay(3000);
    keypad.getKey();
    if(defusing){
      
      break;
    }
    cls();
    lcd.print("Green Time:");
    lcd.setCursor(5,1);
    printTimeDom(greenTime,false);
    delay(3000);
    keypad.getKey();
    if(defusing){
      keypad.getKey();
      break;
    }
  }
  cls();
  delay(100);
  lcd.print("Play Again?");
  lcd.setCursor(0,1);
  lcd.print("A : Yes B : No");
  while(1)
  {
    var = keypad.waitForKey();
    if(var == 'a' ){

      cls();
      domination();
      break;
    }  
    if(var == 'b' ){

      menuPrincipal();
      break;
    }  
  } 
}