#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 
#define SCREEN_HEIGHT 64 

#define OLED_RESET     -1 
#define SCREEN_ADDRESS 0x3C 
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

const int chucho=23;
const int Bubba=17;

void setup() {
  Serial.begin(9600);

  // SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
  if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
    Serial.println(F("SSD1306 allocation failed"));
    for(;;); // Don't proceed, loop forever
  }

pinMode(chucho, INPUT_PULLUP);
pinMode(Bubba, INPUT_PULLUP);

display.clearDisplay();

 }

void loop() {

PREGUNTAR:;
if(digitalRead(chucho)==LOW)
display.clearDisplay
{display.setTextSize(1.5);
  display.setCursor(50,50);
display.println("SPIT");
display.display();

}
if(digitalRead(Bubba)==LOW)
display.clearDisplay
{display.setTextSize(1.5);
  display.setCursor(50,50);
display.println("plebe");
display.display();
goto PREGUNTAR:;
}
}