#include <Adafruit_SSD1306.h>
#include <splash.h>

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels

#define OLED_RESET     -1 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
const int boton=23;

void setup() {
  pinMode(boton, INPUT);
  Serial.begin(9600);

  // SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
  if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
    Serial.println(F("SSD1306 allocation failed"));
    for(;;); // Don't proceed, loop forever
  }
  pinMode(botonA,INPUT_PULLUP)
  pinMode(botonB,INPUT_PULLUP)
  );

  display.clearDisplay();
  display.setTextSize(1);
  display.setTextColor(WHITE);
  
}

void loop() {
  display.setCursor(0,0);
  display.println("WHEN HACES TUS MOMOS EN CLASE  PERO TE TERMINAN BANEANDO");
  display.display();
  preguntar:;
  if(digitalRead(boton)==HIGH)
  {
  display.setCursor(0,30);
  display.println("OH MI LENTE DE CONTACO xdddd");
  display.display();
  }
  goto preguntar;

  }