#include <Adafruit_SSD1306.h>
#include <splash.h>

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels

#define OLED_RESET     -1 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
const int botonA=23;
const int botonB=19;

void setup() {
  pinMode(botonA, INPUT_PULLUP);
  pinMode(botonB, INPUT_PULLUP);
  Serial.begin(9600);

  // SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
  if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
    Serial.println(F("SSD1306 allocation failed"));
    for(;;); // Don't proceed, loop forever
  }

  display.clearDisplay();
  display.setTextSize(1);
  display.setTextColor(WHITE);
  
}

void loop() {

  preguntar:;
  if(digitalRead(botonA)==LOW)
  {
  display.clearDisplay();
  display.setCursor(0,0);
  display.println("WHEN HACES TUS MOMOS EN CLASE    EL FUTURO ES HOY OISTE VIEJO");
  display.display();
  display.setCursor(0,30);
  display.println("PERO TE TERMINAN BANEANDO    OH MI LENTE DE CONTACO xdddd");
  display.display();
  }
  if(digitalRead(botonB)==LOW)
  {
  display.clearDisplay();
  display.setCursor(0,30);
  display.println("OH POR DIOS, MATE A POTTER");
  display.display();
  }

  }