/**
   ESP32 + DHT22 Example for Wokwi
   
   https://wokwi.com/arduino/projects/322410731508073042
*/

#include "DHTesp.h"
#define LED_PIN 13
const int DHT_PIN = 15;

DHTesp dhtSensor;

void setup() {
  Serial.begin(115200);
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);
  pinMode(LED_PIN, OUTPUT);
}

void loop() {
  TempAndHumidity  data = dhtSensor.getTempAndHumidity();
  float temp = data.temperature;
  Serial.println("Temp: " + String(data.temperature, 2) + "°C");
  Serial.println("Humidity: " + String(data.humidity, 1) + "%");
  Serial.println("---");
  delay(2000); // Wait for a new reading from the sensor (DHT22 has ~0.5Hz sample rate)
 if (temp > 30.0) {
    digitalWrite(LED_PIN, HIGH); // Menghidupkan LED
  } else if (temp < 25.0) {
    digitalWrite(LED_PIN, LOW); // Mematikan LED
  }
  delay(1000);
}