//Default I2C pins for Raspberry Pi Pico
// SDA --> GPIO 4
// SCL --> GPIO 5

#include <Wire.h>
//#include <Adafruit_GFX.h>
#include <ACROBOTIC_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels

// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
ACROBOTIC_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, -1);

void setup() {
 
  Serial.begin(115200);
 Wire.setSDA(0);  
 Wire.setSCL(1);
 if(!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { // Address 0x3D for 128x64
    Serial.println(F("SSD1306 allocation failed"));
 for(;;);
    
  }
  delay(2000);
  display.clearDisplay();
  display.setTextSize(1);
  display.setTextColor(WHITE);
  display.setCursor(0, 10);
  // Display static text
  display.println("Hello, world!!!");
  display.display(); 
}

void loop() {
  
}