// Program to exercise the MD_MAX72XX library
//
// Uses a sequence of bitmaps defined as a font to display animations of eyes to convey emotion.
// Eyes are coordinated to work together.
//
#include <MD_MAX72xx.h>
#include <SPI.h>
#include "MD_RobotEyes.h"

// NOTE: These pin numbers will probably not work with your hardware and may
// need to be adapted
#define HARDWARE_TYPE MD_MAX72XX::PAROLA_HW
#define MAX_DEVICES 2

#define CLK_PIN   13  // or SCK
#define DATA_PIN  11  // or MOSI
#define CS_PIN    10  // or SS

// SPI hardware interface
MD_MAX72XX M = MD_MAX72XX(HARDWARE_TYPE, CS_PIN, MAX_DEVICES);

MD_RobotEyes E;

typedef struct
{
  char name[7];
  MD_RobotEyes::emotion_t e;
  uint16_t timePause;  // in milliseconds
  const char *marathiName;  // Marathi translation
} sampleItem_t;

const sampleItem_t eSeq[] =
{
  { "Nutral", MD_RobotEyes::E_NEUTRAL, 8000, "सामान्य" },
  { "Blink" , MD_RobotEyes::E_BLINK, 1000, "आँख फड़कना" },
  { "Wink"  , MD_RobotEyes::E_WINK, 1000, "आँख मारना" },
  { "Left"  , MD_RobotEyes::E_LOOK_L, 1000, "डावा" },
  { "Right" , MD_RobotEyes::E_LOOK_R, 1000, "दावा" },
  { "Up"    , MD_RobotEyes::E_LOOK_U, 1000, "वर" },
  { "Down"  , MD_RobotEyes::E_LOOK_D, 1000, "किरीट" },
  { "Angry" , MD_RobotEyes::E_ANGRY, 1000, "रोषीला" },
  { "Sad"   , MD_RobotEyes::E_SAD, 1000, "दुःखी" },
  { "Evil"  , MD_RobotEyes::E_EVIL, 1000, "दुर्जन" },
  { "Evil2" , MD_RobotEyes::E_EVIL2, 1000, "दुर्जन2" },
  { "Squint", MD_RobotEyes::E_SQUINT, 1000, "आँखों को झपकना" },
  { "Dead"  , MD_RobotEyes::E_DEAD, 1000, "मृत" },
  { "ScanV" , MD_RobotEyes::E_SCAN_UD, 1000, "स्कैन ऊपर-नीचे" },
  { "ScanH" , MD_RobotEyes::E_SCAN_LR, 1000, "स्कैन बाईं-दाईं" },
};

void setup()
{
  Serial.begin(9600);  // Initialize serial communication at 9600 baud rate
  M.begin();
  E.begin(&M);
  E.setText("RobotEyes");
  do { } while (!E.runAnimation()); // wait for the text to finish
}

void loop()
{
  static uint32_t timeStartDelay;
  static uint8_t index = ARRAY_SIZE(eSeq);
  static enum { S_IDLE, S_TEXT, S_ANIM, S_PAUSE } state = S_IDLE;

  bool b = E.runAnimation();    // always run the animation

  switch (state)
  {
  case S_IDLE:
    index++;
    if (index >= ARRAY_SIZE(eSeq)) 
      index = 0;
    E.setText(eSeq[index].name);
    Serial.print("क्रिया: ");  // Action:
    Serial.println(eSeq[index].marathiName);  // Marathi translation
    state = S_TEXT;
    break;

  case S_TEXT: // wait for the text to finish
    if (b)  // text animation is finished
    {
      E.setAnimation(eSeq[index].e, true);
      state = S_ANIM;
    }
    break;

  case S_ANIM:  // checking animation is completed
    if (b)  // animation is finished
    {
      timeStartDelay = millis();
      state = S_PAUSE;
    }
    break;
  
  case S_PAUSE: // non blocking waiting for a period between animations
    if (millis() - timeStartDelay >= eSeq[index].timePause)
      state = S_IDLE;
    break;

  default:
    state = S_IDLE;
    break;
  }
}