// Project downloaded from https://goodarduinocode.com/projects/alarm-clock
/**
Arduino Digital Alarm Clock
Copyright (C) 2024, Abran DRozario.
Released under the MIT License.
*/
#include <SevSeg.h>
#include "Button.h"
#include "config.h"
#include "AlarmTone.h"
#include "Clock.h"
const int COLON_PIN = 13;
const int SPEAKER_PIN = A3;
Button hourButton(A0);
Button minuteButton(A1);
Button alarmButton(A2);
AlarmTone alarmTone;
Clock clock;
SevSeg sevseg;
enum DisplayState {
DisplayClock,
DisplayAlarmStatus,
DisplayAlarmTime,
DisplayAlarmActive,
DisplaySnooze,
};
DisplayState displayState = DisplayClock;
long lastStateChange = 0;
void changeDisplayState(DisplayState newValue) {
displayState = newValue;
lastStateChange = millis();
}
long millisSinceStateChange() {
return millis() - lastStateChange;
}
void setColon(bool on) {
digitalWrite(COLON_PIN, on ? LOW : HIGH);
}
void displayTime() {
DateTime now = clock.now();
sevseg.setNumber(now.hour() * 100 + now.minute());
bool blinkState = now.second() % 2 == 0;
setColon(blinkState);
}
void clockState() {
displayTime();
if (alarmButton.read() == Button::RELEASED && clock.alarmActive()) {
// Read alarmButton has_changed() to clear its state
alarmButton.has_changed();
changeDisplayState(DisplayAlarmActive);
return;
}
if (hourButton.pressed()) {
clock.incrementHour();
}
if (minuteButton.pressed()) {
clock.incrementMinute();
}
if (alarmButton.pressed()) {
clock.toggleAlarm();
changeDisplayState(DisplayAlarmStatus);
}
}
void alarmStatusState() {
setColon(false);
sevseg.setChars(clock.alarmEnabled() ? " on" : " off");
if (millisSinceStateChange() > ALARM_STATUS_DISPLAY_TIME) {
changeDisplayState(clock.alarmEnabled() ? DisplayAlarmTime
: DisplayClock);
return;
}
}
void alarmTimeState() {
DateTime alarm = clock.alarmTime();
sevseg.setNumber(alarm.hour() * 100 + alarm.minute(), -1);
if (millisSinceStateChange() > ALARM_HOUR_DISPLAY_TIME
|| alarmButton.pressed()) {
changeDisplayState(DisplayClock);
return;
}
if (hourButton.pressed()) {
clock.incrementAlarmHour();
lastStateChange = millis();
}
if (minuteButton.pressed()) {
clock.incrementAlarmMinute();
lastStateChange = millis();
}
if (alarmButton.pressed()) {
changeDisplayState(DisplayClock);
}
}
void alarmState() {
displayTime();
if (alarmButton.read() == Button::RELEASED) {
alarmTone.play();
}
if (alarmButton.pressed()) {
alarmTone.stop();
}
if (alarmButton.released()) {
alarmTone.stop();
bool longPress = alarmButton.repeat_count() > 0;
if (longPress) {
clock.stopAlarm();
changeDisplayState(DisplayClock);
} else {
clock.snooze();
changeDisplayState(DisplaySnooze);
}
}
}
void snoozeState() {
sevseg.setChars("****");
if (millisSinceStateChange() > SNOOZE_DISPLAY_TIME) {
changeDisplayState(DisplayClock);
return;
}
}
void setupSevenSegment() {
byte digits = 4;
byte digitPins[] = {2, 3, 4, 5};
byte segmentPins[] = {6, 7, 8, 9, 10, 11, 12};
bool resistorsOnSegments = false;
bool updateWithDelays = false;
bool leadingZeros = true;
bool disableDecPoint = true;
sevseg.begin(DISPLAY_TYPE, digits, digitPins, segmentPins, resistorsOnSegments,
updateWithDelays, leadingZeros, disableDecPoint);
sevseg.setBrightness(90);
pinMode(COLON_PIN, OUTPUT);
}
void startup_sound() {
tone(A3, 880, 20);
delay(500);
tone(A3, 880, 20);
delay(500);
}
void setup() {
Serial.begin(115200);
clock.begin();
hourButton.begin();
hourButton.set_repeat(500, 200);
minuteButton.begin();
minuteButton.set_repeat(500, 200);
alarmButton.begin();
alarmButton.set_repeat(1000, -1);
alarmTone.begin(SPEAKER_PIN);
setupSevenSegment();
startup_sound();
}
void loop() {
sevseg.refreshDisplay();
switch (displayState) {
case DisplayClock:
clockState();
break;
case DisplayAlarmStatus:
alarmStatusState();
break;
case DisplayAlarmTime:
alarmTimeState();
break;
case DisplayAlarmActive:
alarmState();
break;
case DisplaySnooze:
snoozeState();
break;
}
}
nano:12
nano:11
nano:10
nano:9
nano:8
nano:7
nano:6
nano:5
nano:4
nano:3
nano:2
nano:GND.2
nano:RESET.2
nano:0
nano:1
nano:13
nano:3.3V
nano:AREF
nano:A0
nano:A1
nano:A2
nano:A3
nano:A4
nano:A5
nano:A6
nano:A7
nano:5V
nano:RESET
nano:GND.1
nano:VIN
nano:12.2
nano:5V.2
nano:13.2
nano:11.2
nano:RESET.3
nano:GND.3
sevseg1:A
sevseg1:B
sevseg1:C
sevseg1:D
sevseg1:E
sevseg1:F
sevseg1:G
sevseg1:DP
sevseg1:DIG1
sevseg1:DIG2
sevseg1:DIG3
sevseg1:DIG4
sevseg1:COM
sevseg1:CLN
rtc1:GND
rtc1:5V
rtc1:SDA
rtc1:SCL
rtc1:SQW
bz1:1
bz1:2
btn1:1.l
btn1:2.l
btn1:1.r
btn1:2.r
btn2:1.l
btn2:2.l
btn2:1.r
btn2:2.r
btn3:1.l
btn3:2.l
btn3:1.r
btn3:2.r
r1:1
r1:2
r2:1
r2:2
r3:1
r3:2