#include <WiFi.h>
#include <ThingSpeak.h>
char ssid[] = "Wokwi-GUEST";
char pass[] = "";
int Trigpin=18;
int echopin=5;
long Duration,Distance;
WiFiClient client;
unsigned long myChannelNumber = 2924251;
const char * myWriteAPIKey = "PZ2A1GL6Q18BZ12W";
const char* server = "api.thingspeak.com";
int distance,statusCode;
void setup() {
Serial.begin(115200);
pinMode(Trigpin,OUTPUT);
pinMode(echopin,INPUT);
WiFi.mode(WIFI_STA);
ThingSpeak.begin(client);
}
void loop() {
  digitalWrite(Trigpin,LOW);
 delayMicroseconds(2);
 digitalWrite(Trigpin,HIGH);
 delayMicroseconds(10);
 digitalWrite(Trigpin,LOW);
 delayMicroseconds(2);
 Duration=pulseIn(echopin,HIGH);
 Distance=Duration*0.034/2;

if(WiFi.status() != WL_CONNECTED)
{
Serial.print("Attempting to connect");
while(WiFi.status() != WL_CONNECTED)
{
WiFi.begin(ssid, pass); // Connect to WPA/WPA2 network. Change
//this line if using open or WEP network
//Serial.print(".");
//delay(5000);
}
Serial.println("\nConnected.");
}

statusCode = ThingSpeak.writeField(myChannelNumber, 1, distance,
myWriteAPIKey);
if(statusCode == 200) { //successful writing code
Serial.println("Channel update successful.");
}
else {
Serial.println("Problem Writing data. HTTP error code :" +
String(statusCode));
}
ThingSpeak.setField(1,Distance);
 int x = ThingSpeak.writeFields(myChannelNumber,myWriteAPIKey);
 Serial.print("Distance=");
 Serial.println(Distance);
 delay(1000);
}