#define trigger 10
#define echo 11
#define motor 8
#define buzzer 12

#include <LiquidCrystal_I2C.h>

#define I2C_ADDR    0x27
#define LCD_COLUMNS 16
#define LCD_LINES   2

LiquidCrystal_I2C lcd(I2C_ADDR, LCD_COLUMNS, LCD_LINES);
float time=0,distance=0;
int temp=0; 
void setup()
{
 lcd.begin(16,2);
 pinMode(trigger,OUTPUT);
 pinMode(echo,INPUT);
 pinMode(motor, OUTPUT);
 pinMode(buzzer, OUTPUT);
 lcd.print("  Water Level ");
 lcd.setCursor(0,1);
 lcd.print("   Indicator  ");
 delay(2000);
}
 
void loop()
{
 lcd.clear();
 digitalWrite(trigger,LOW);
 delayMicroseconds(2);
 digitalWrite(trigger,HIGH);
 delayMicroseconds(10);
 digitalWrite(trigger,LOW);
 delayMicroseconds(2);
 time=pulseIn(echo,HIGH);
 distance=time*340/20000;
 lcd.clear();
 lcd.print("Water Space In  ");
 lcd.setCursor(0,1);
 lcd.print("Tank is: ");
 lcd.print(distance);
 lcd.print("Cm");
 delay(2000);
 if(distance<150 && temp==0)
 {
     digitalWrite(motor, LOW);
     digitalWrite(buzzer, HIGH);
     lcd.clear();
     lcd.print("Water Tank Full ");
     lcd.setCursor(0,1);
     lcd.print("Motor Turned OFF");
     delay(2000);
     digitalWrite(buzzer, LOW);
     delay(3000);
     temp=1;
 }
 
  else if(distance<150 && temp==1)
 {
     digitalWrite(motor, LOW);
     lcd.clear();
     lcd.print("Water Tank Full ");
     lcd.setCursor(0,1);
     lcd.print("Motor Turned OFF");
     delay(5000);
 }
 
 else if(distance>30)
 {
   digitalWrite(motor, HIGH);
   lcd.clear();
   lcd.print("LOW Water Level");
   lcd.setCursor(0,1);
   lcd.print("Motor Turned ON");
   delay(5000);
   temp=0;
 }
}