/* 
 * TimeSerial.pde
 * example code illustrating Time library set through serial port messages.
 *
 * Messages consist of the letter T followed by ten digit time (as seconds since Jan 1 1970)
 * you can send the text on the next line using Serial Monitor to set the clock to noon Jan 1 2013
 T1357041600  
 *
 * A Processing example sketch to automatically send the messages is included in the download
 * On Linux, you can use "date +T%s\n > /dev/ttyACM0" (UTC time zone)
 */ 
 
#include <TimeLib.h>
#include <LiquidCrystal_I2C.h>

#define LCD_ADDR 0x27
#define LCD_COLUMNS 16
#define LCD_ROWS 2
LiquidCrystal_I2C lcd(LCD_ADDR, LCD_COLUMNS, LCD_ROWS);


#define TIME_HEADER  "T"   // Header tag for serial time sync message
#define TIME_REQUEST  7    // ASCII bell character requests a time sync message 

void setup()  {
  Serial.begin(9600);
  while (!Serial) ; // Needed for Leonardo only
  pinMode(13, OUTPUT);
  setSyncProvider( requestSync);  //set function to call when sync required
  Serial.println("Waiting for sync message");

  lcd.begin(LCD_COLUMNS, LCD_ROWS);
  lcd.init();
  lcd.backlight();

  lcd.setCursor(0, 0);
  lcd.print("Hello");
  delay(1000);
  lcd.setCursor(0, 0);
  lcd.print("Waitng for sync msg");

}

void loop(){    
  if (Serial.available()) {
    processSyncMessage();
  }
  if (timeStatus()!= timeNotSet) {
    digitalClockDisplay();  
  }
  if (timeStatus() == timeSet) {
    digitalWrite(13, HIGH); // LED on if synced
  } else {
    digitalWrite(13, LOW);  // LED off if needs refresh
  }
  delay(1000);
}

void digitalClockDisplay(){
  // digital clock display of the time
  Serial.print(hour());
  printDigits(minute());
  printDigits(second());
  Serial.print(" ");
  Serial.print(day());
  Serial.print(" ");
  Serial.print(month());
  Serial.print(" ");
  Serial.print(year()); 
  Serial.println(); 
}

void printDigits(int digits){
  // utility function for digital clock display: prints preceding colon and leading 0
  Serial.print(":");
  if(digits < 10)
    Serial.print('0');
  Serial.print(digits);
}


void processSyncMessage() {
  unsigned long pctime;
  const unsigned long DEFAULT_TIME = 1357041600; // Jan 1 2013

  if(Serial.find(TIME_HEADER)) {
     pctime = Serial.parseInt();
     if( pctime >= DEFAULT_TIME) { // check the integer is a valid time (greater than Jan 1 2013)
       setTime(pctime); // Sync Arduino clock to the time received on the serial port
     }
  }
}

time_t requestSync()
{
  Serial.write(TIME_REQUEST);  
  return 0; // the time will be sent later in response to serial mesg
}