//////////////////////////////////////////////////////////////////////////////////////////////////////
/////  Written by: Bahirah                                                            ////////////////
/////  Company name: THE BEST ROBOTIC ENTERPRISE                                      ////////////////
/////  Email: dbez.robotic@gmail.com                                                  ////////////////
//////////////////////////////////////////////////////////////////////////////////////////////////////

#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define OLED_RESET -1 
#define SCREEN_ADDRESS 0x3C
#define SCREEN_WIDTH 128
#define SCREEN_HEIGHT 64

Adafruit_SSD1306 oled(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

void setup() {
    Serial.begin(9600);

  // initialize OLED display with I2C address 0x3C
  if (!oled.begin(SSD1306_SWITCHCAPVCC, 0x3C)) {
    Serial.println(F("failed to start SSD1306 OLED"));
    while (1);
  }

  delay(2000);         // wait two seconds for initializing
  oled.clearDisplay(); // clear display

  oled.setTextSize(1);         // set text size
  oled.setTextColor(WHITE);    // set text color
  oled.setCursor(30, 20);       // set position to display
  oled.println("Gabbar Singh"); // set text
  oled.display();              // display on OLED
}


void loop() {
  // put your main code here, to run repeatedly:

}