#include <WiFi.h>
#include <PubSubClient.h>
#define led 2
#define saklar 25
int sw1 = 0;
const char* ssid = "Wokwi-GUEST";
const char* password = "";
const char* mqtt_server = "mqtt-dashboard.com";
WiFiClient espClient;
PubSubClient client(espClient);
void setup_wifi() {
  delay(10);
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);
  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  randomSeed(micros());
  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}
void callback(char* topic, byte* payload, unsigned int length) {
  Serial.print("Message arrived [");
  Serial.print(topic);
  Serial.print("] ");
  for (int i = 0; i < length; i++) {
    Serial.print((char)payload[i]);
  }
  if ((char)payload[16] == 't') {
    digitalWrite(led, LOW);   // Turn the LED on (Note that LOW is the voltage level
  } else {
    digitalWrite(led, HIGH);  // Turn the LED off by making the voltage HIGH
  }
}
void reconnect() {
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
    String clientId = "ESP32Client-";
    clientId += String(random(0xffff), HEX);
    if (client.connect(clientId.c_str())) {
      Serial.println("connected");
      client.publish("wokwi_ebpro/sw/satu", "{\"sw\":\"false\"}");
      client.subscribe("ebpro_wokwi/led/satu");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      delay(5000);
    }
  }
}
void setup() {
  pinMode(saklar, INPUT_PULLUP);
  pinMode(led, OUTPUT);
  Serial.begin(115200);
  setup_wifi();
  client.setServer(mqtt_server, 1883);
  client.setCallback(callback);
}
void loop() {
  if (!client.connected()) {
    reconnect();
  }
  client.loop();
  int sw = !digitalRead(saklar);
  if (sw != sw1) {
    Serial.print("Publish message: ");
    if (sw) {
      Serial.println("{sw:true}");
      client.publish("wokwi_ebpro/sw/satu", "{\"sw\":true}");
    } else {
      Serial.println("{sw:false}");
      client.publish("wokwi_ebpro/sw/satu", "{\"sw\":false}");
    }
  }
  sw1 = sw;
}