"""
MicroPython IoT Weather Station Example for Wokwi.com

To view the data:

1. Go to http://www.hivemq.com/demos/websocket-client/
2. Click "Connect"
3. Under Subscriptions, click "Add New Topic Subscription"
4. In the Topic field, type "wokwi-weather" then click "Subscribe"

Now click on the DHT22 sensor in the simulation,
change the temperature/humidity, and you should see
the message appear on the MQTT Broker, in the "Messages" pane.

Copyright (C) 2022
"""

import network
import time
from machine import Pin
import dht
from umqtt.simple import MQTTClient

def sub_cb(topic, msg): 
   print(topic)
   print(msg)
   global MSG_ONOFF
   MSG_ONOFF = msg
   print(MSG_ONOFF) 

# MQTT Server Parameters
MQTT_CLIENT_ID = "VERSION1"
MQTT_BROKER    = "viaduct.proxy.rlwy.net"
MQTT_PORT =  47375
MQTT_BROKER    = "viaduct.proxy.rlwy.net"
MQTT_PORT =  20500
#MQTT_USER      = "gbertolani"
#MQTT_PASSWORD  = "aio_icLs33xMj480Yi0Xgcy67JyDk1h6"
MQTT_TOPIC_PUB_TMP_MSG = "gbertolani/feeds/msg"
MQTT_TOPIC_PUB_HUM_MSG = "gbertolani/feeds/msg_hum"
MQTT_TOPIC_PUB_TMP = "gbertolani/feeds/temperatura"
MQTT_TOPIC_PUB_HUM = "gbertolani/feeds/humedad"
MQTT_TOPIC_SUB = "gbertolani/feeds/boton"

MSG_ONOFF = b"OFF"

#crea el sensor asociado al pin 15
sensor = dht.DHT22(Pin(15))

#crea el led asociado al pin 13
led = Pin(13,Pin.OUT)
led.off() #apaga el led

print("Connecting to WiFi", end="")
sta_if = network.WLAN(network.STA_IF)
sta_if.active(True)
sta_if.connect('Wokwi-GUEST', '')

#esperando se conecte a la wifi
while not sta_if.isconnected():
  print(".", end="")
  time.sleep(0.1)
print(" Connected!")

#conectando al servidor MqTT
print("Connecting to MQTT server... ", end="")
client = MQTTClient(MQTT_CLIENT_ID, MQTT_BROKER, port=MQTT_PORT)
client.set_callback(sub_cb) 
client.connect()
client.subscribe(MQTT_TOPIC_SUB) 
print("Connected!")

print("Esperando orden de inicio de lectura sensor!")
#inicializa el boton en el dashboard en off
client.publish(MQTT_TOPIC_SUB, b"OFF")
client.wait_msg() #espera se presion on en la web para iniciar lectura
while MSG_ONOFF != b"ON":
  client.wait_msg()

led.on() #enciende el led de activado
print("Sistema de lectura de sensor iniciado!")
prev_temp = ""
prev_humi = ""


while True:
  sensor.measure() #captura inforación del sensor DTH22
  
  temp = str(sensor.temperature())
  humi = str(sensor.humidity())

  #muestra la temperatura si cambio el valor
  if humi != prev_humi:
    prev_humi = humi
    client.publish(MQTT_TOPIC_PUB_HUM, humi)
    aux = f"la humedad es de {humi}"
    print(aux)
    client.publish(MQTT_TOPIC_PUB_HUM_MSG, aux)
  else:
    print("No change humidity")


  if temp != prev_temp:
    prev_temp = temp
    client.publish(MQTT_TOPIC_PUB_TMP, temp)
    aux = f"la temperatura es de {temp}"
    print(aux)
    client.publish(MQTT_TOPIC_PUB_TMP_MSG, aux)
  else:
    print("No change temperature")

  #chequea boton on off en cada bucle
  client.check_msg()
  if MSG_ONOFF == b"ON":
    led.on()
  else:
    led.off()

  time.sleep(1)