#define BLYNK_PRINT Serial

#define BLYNK_TEMPLATE_ID "TMPL6KL2JSrQ0"
#define BLYNK_TEMPLATE_NAME "SmartHome"
#define BLYNK_AUTH_TOKEN "Drdiv6g-_sV4eAHRGhrZ_js66SIQ7ZFA"

#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>
#include <DHT.h>
#include <Wire.h> // Library for I2C communication
#include <LiquidCrystal_I2C.h> // Library for LCD via I2C
#include <ESP32Servo.h> // Library for servo motor

#define DHTPIN 14    // GPIO pin for DHT22 sensor
#define DHTTYPE DHT22   // DHT 22

const int trigPin = 2; // GPIO pin numbers for ultrasonic sensors
const int echoPin = 4;

const int trig1Pin = 5;
const int echo1Pin = 18;

const int servoPin = 12; // GPIO pin for servo motor
Servo myServo; // Create a servo object

DHT dht(DHTPIN, DHTTYPE); // Initialize DHT sensor

LiquidCrystal_I2C lcd(0x27, 16, 2); // Set the LCD address to 0x27 for a 16 chars and 2 line display

int icecreamQuantity = 0;
int chocolateQuantity = 0;

char auth[] = BLYNK_AUTH_TOKEN;
char ssid[] = "Wokwi-GUEST";
char pass[] = "";
BlynkTimer timer;

void setup() {
  Serial.begin(115200);
  Blynk.begin(auth, ssid, pass);
  dht.begin(); // Initialize DHT sensor
    // configure the trigger pin to output mode
  pinMode(trigPin, OUTPUT);
  // configure the echo pin to input mode
  pinMode(echoPin, INPUT);
      // configure the trigger pin to output mode
  pinMode(trig1Pin, OUTPUT);
  // configure the echo pin to input mode
  pinMode(echo1Pin, INPUT);
  myServo.attach(servoPin); // Attach the servo to its pin
  lcd.init();
  lcd.backlight();
  timer.setInterval(1000L, sendSensorData); // Send sensor data every second
}

void loop() {
  Blynk.run(); // Call Blynk functions
  timer.run(); // Run timer
  Product1();
  Product2();
}

void sendSensorData() {
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();
  int servoStatus = (temperature > 12) ? 1 : 0;
  Blynk.virtualWrite(V3, icecreamQuantity); // Virtual pin V1 for Icecream quantity
  Blynk.virtualWrite(V1, chocolateQuantity); // Virtual pin V2 for Chocolate quantity
  Blynk.virtualWrite(V0, temperature); // Virtual pin V3 for temperature
  Blynk.virtualWrite(V4, humidity); // Virtual pin V4 for humidity
  Blynk.virtualWrite(V2, servoStatus); // Virtual pin V5 for servo status
}

void Product1() {
  delay(500); // reading will be taken after 500 milliseconds
  Serial.println("\n");
  int duration, distance_cm; // Change variable name to distance_cm
  digitalWrite(trigPin, HIGH);
  delayMicroseconds(10);
  digitalWrite(trigPin, LOW);
  duration = pulseIn(echoPin, HIGH);
  distance_cm = duration * 0.034 / 2; // Convert duration to distance in centimeters
  Serial.println(distance_cm);
  calculateQuantity(distance_cm, icecreamQuantity); // Pass distance_cm to calculateQuantity
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();
  displayOnLCD("Icecream", icecreamQuantity, temperature, humidity);
  if (temperature > 12) {
    activateServo();
  }
}

void Product2() {
  delay(500); // reading will be taken after 500 milliseconds
  Serial.println("\n");
  int duration, distance_cm; // Change variable name to distance_cm
  digitalWrite(trig1Pin, HIGH);
  delayMicroseconds(10);
  digitalWrite(trig1Pin, LOW);
  duration = pulseIn(echo1Pin, HIGH);
  distance_cm = duration * 0.034 / 2; // Convert duration to distance in centimeters
  Serial.println(distance_cm);
  calculateQuantity(distance_cm, chocolateQuantity); // Pass distance_cm to calculateQuantity
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();
  displayOnLCD("Chocolate", chocolateQuantity, temperature, humidity);
  if (temperature > 12) {
    activateServo();
  }
}

void calculateQuantity(int distance, int& quantity) {
  if (distance < 23) {  
    quantity = 5;
  } else if (distance >= 23 && distance < 35) {  
    quantity = 4;
  } else if (distance >= 35 && distance < 47) {  
    quantity = 3;
  } else if (distance >= 47 && distance < 60) {  
    quantity = 2;
  } else if (distance >= 60 && distance < 70) {  
    quantity = 1;
  } else {
    quantity = 0;
  }
}

void displayOnLCD(String product, int quantity, float temperature, float humidity) {
  lcd.clear();
  lcd.setCursor(0, 0);
  lcd.print(product);
  lcd.print(":");
  lcd.print(quantity);
  lcd.setCursor(0, 1);
  lcd.print("T:");
  lcd.print(temperature);
  lcd.print("H:");
  lcd.print(humidity);
  
  Serial.print("Product: ");
  Serial.print(product);
  Serial.print(" - Qty: ");
  Serial.print(quantity);
  Serial.print(" - Temp: ");
  Serial.print(temperature);
  Serial.print("C - Hum: ");
  Serial.print(humidity);
  Serial.println("%");
}

void activateServo() {
  myServo.write(90); // Rotate servo to 90 degrees
  delay(1000); // Wait for servo to reach its position
  myServo.write(0); // Rotate servo back to 0 degrees
}