// pohyblivé pruhy na obrazovce loading...

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define OLED_RESET -1


Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);


void setup() {
  //display.begin(SH1106_SWITCHCAPVCC, 0x3C);  // inicializace OLED displeje
  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);  // initialize with the I2C addr 0x3C (for the 128x64)
  display.clearDisplay();
  display.setTextSize(1);
  display.setTextColor(WHITE);
  Serial.begin(9600); // open the serial port at 9600 bps:  
  display.setTextSize(2);
display.setTextColor(WHITE);
display.setCursor(0,0);
display.println("    AIR   SUSPENSIONMITSUBISHI");
display.display();
delay(4000);
}


void loop() {
  display.clearDisplay();


int temp1 = map(analogRead(A0), 0, 1023, 1, SCREEN_WIDTH-4); 

display.setTextSize(1);
display.setTextColor(WHITE);
display.setCursor(0,0);
display.println("PRESSURE RESERVOIR");
display.drawRect (0,12,SCREEN_WIDTH, 16, WHITE);
display.fillRect (2,14, temp1, 12, WHITE);
display.setTextSize(1);
display.setTextColor(BLACK, WHITE);
display.setCursor(8,17);
display.println("MIN");
display.setTextSize(1);
display.setTextColor(BLACK, WHITE);
display.setCursor(50,17);
display.println("3bar");




int temp2 = map(analogRead(A1), 0, 1023, 1, SCREEN_WIDTH-4); 

display.setTextSize(1);
display.setTextColor(WHITE);
display.setCursor(0,36);
display.println("PRESSURE SUSPENSION");
display.drawRect (0,48,SCREEN_WIDTH, 16, WHITE);
display.fillRect (2,50, temp2, 12, WHITE);


delay(200);





      
  display.display();
                                  
                                    
}