#include <WiFi.h>
#include <WiFiClient.h>
#include <WiFiServer.h>
#include <WiFiUdp.h>

const char* ssid = "Kos pak kun utama";
const char* password = "Akuyakin123";
const char* ip_address = "10.10.0.2"; // Ganti dengan alamat IP ESP pertama
const int port = 80;

WiFiClient client;

const int buttonPin1 = 14; // GPIO14 untuk tombol 1
const int buttonPin2 = 15; // GPIO15 untuk tombol 2

void setup() {
  Serial.begin(115200);
  pinMode(buttonPin1, INPUT);
  pinMode(buttonPin2, INPUT);
  connectToWiFi();
}

void loop() {
  if (digitalRead(buttonPin1) == HIGH) {
    sendMessage("LED1_ON");
    delay(1000); // debouncing
  }
  if (digitalRead(buttonPin2) == HIGH) {
    sendMessage("LED2_ON");
    delay(1000); // debouncing
  }
}

void connectToWiFi() {
  Serial.print("Connecting to ");
  Serial.println(ssid);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(1000);
    Serial.println("Connecting...");
  }
  Serial.println("Connected to WiFi");
}

void sendMessage(String message) {
  if (client.connect(ip_address, port)) {
    client.print(message);
    client.stop();
  }
}