#include <Wire.h>
#include <RTClib.h>
#include <WiFi.h>
#include <HTTPClient.h>
#include <Arduino_JSON.h>

RTC_DS1307 myrtc;
DateTime mynow;

const char* ssid = "Wokwi-GUEST";
const char* password = "";
String serverName = "https://api.thingspeak.com/update?api_key=1T6Q7NW8YCTB8DTY&field1=";

void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  Wire.begin();
  myrtc.begin();
  WiFi.begin(ssid, password);
  Serial.println("Connecting");
  while(WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.print("Connected to WiFi network with IP Address: ");
  Serial.println(WiFi.localIP()); 
  pinMode(2,OUTPUT);
  pinMode(39,INPUT);

}

void loop() {
  // put your main code here, to run repeatedly:
  unsigned lembap = analogRead(39);
  float kelembapan = lembap/ 40.51;
  delay(1000);
        mynow = myrtc.now();
  byte jam = mynow.hour();
  byte menit = mynow.minute();
  byte detik = mynow.second();
  Serial.print("kelembapan = ");
  Serial.println(kelembapan);
  Serial.print(jam);
  Serial.print(" : ");
  Serial.print(menit);
  Serial.print(" : ");
  Serial.print(detik);
  Serial.println("");

  if(jam == 10 && menit == 37 && detik == 00 ){
    if(kelembapan < 50){
      digitalWrite(2,HIGH);
      delay(5000);
      digitalWrite(2,LOW);
      Serial.println("Penyiraman Tanaman");
      if(WiFi.status()== WL_CONNECTED){
    HTTPClient http;
    String serverPath = serverName + String(kelembapan);
    http.begin(serverPath);
    int httpResponseCode = http.GET();
    if (httpResponseCode>0)
    {
      Serial.print("HTTP Response code: ");
      Serial.println(httpResponseCode);
      String payload = http.getString();
      Serial.println(payload);
    }
    else
    {
      Serial.print("Error code: ");
      Serial.println(httpResponseCode);
    }
    http.end();
  }
    }
  }
}