#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <WiFi.h>
#include <PubSubClient.h>
Adafruit_SSD1306 display(128, 64, &Wire, -1);
WiFiClient espClient;
PubSubClient client(espClient);
const char* ssid = "Wokwi-GUEST";
const char* password = "";
const char* mqtt_server = "mqtt-dashboard.com";
char dt1;
char dt2[4];
int c = 0;
int j = 0;
int setpoin = 0;
String pesan;
void setup_wifi() {
  delay(10);
  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
  }
}
void reconnect() {
  while (!client.connected()) {
    String clientId = "ESP32Client-";
    clientId += String(random(0xffff), HEX);
    if (client.connect(clientId.c_str())) {
      client.subscribe("kontrol/pid_suhu");
    } else {
      delay(5000);
    }
  }
}
void callback(char* topic, byte* payload, unsigned int length) {
  for (int i = 0; i < length; i++) {
    dt1 = ((char)payload[i]);
    if (dt1 >= '0' && dt1 <= '9') {
      dt2[j] = dt1;
      j++;
    }
  }
  setpoin = atoi(dt2);
  Serial.println(setpoin);
  j = 0;
  memset(dt2, 0, sizeof(dt2));
}
void setup() {
  Serial.begin(9600);
  if (!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) {
    for (;;);
  }
  setup_wifi();
  client.setServer(mqtt_server, 1883);
  client.setCallback(callback);
}
void loop() {
  int a = analogRead(36);
  if (a != c) {
    int b = map(a, 0, 4095, 0, 100);
    Serial.println(b);
  }
  c = a;
  if (!client.connected()) {
    reconnect();
  }
  client.loop();
}
void serialEvent() {
  while (Serial.available()) {
    int data1 = Serial.parseInt();
    int data2 = Serial.parseInt();
    int data3 = Serial.parseInt();
    if (Serial.read() == char(13)) {
      display.clearDisplay();
      display.setTextSize(2);
      display.setTextColor(SSD1306_WHITE);
      display.setCursor(0, 0);
      display.print("SP : ");
      display.println(data1);
      display.print("PV : ");
      display.println(data2 * 0.01);
      display.print("OP : ");
      display.println(data3);
      display.display();
      pesan = "{\"sp\":" + String(data1);
      pesan = pesan + ",\"pv\":" + String(data2 * 0.01);
      pesan = pesan + ",\"op\":" + String(data3) + "}";
      client.publish("monitor/pid_suhu", pesan.c_str());
    }
  }
}