#if defined(ESP32)
#include <WiFiMulti.h>
WiFiMulti wifiMulti;
#define DEVICE "ESP32"
#elif defined(ESP8266)
#include <ESP8266WiFiMulti.h>
ESP8266WiFiMulti wifiMulti;
#define DEVICE "ESP8266"
#endif
  
#include <InfluxDbClient.h>
#include <InfluxDbCloud.h>

#include <Adafruit_MPU6050.h>
#include <Adafruit_Sensor.h>
#include <Wire.h>

// WiFi AP SSID
#define WIFI_SSID ""
// WiFi password
#define WIFI_PASSWORD ""
  
#define INFLUXDB_URL ""
#define INFLUXDB_TOKEN ""
#define INFLUXDB_ORG ""
#define INFLUXDB_BUCKET ""
  
// Time zone info
#define TZ_INFO ""

// Declare InfluxDB client instance with preconfigured InfluxCloud certificate
InfluxDBClient client(INFLUXDB_URL, INFLUXDB_ORG, INFLUXDB_BUCKET, INFLUXDB_TOKEN, InfluxDbCloud2CACert);
  
 // Declare Data point
Point sensor("");

Adafruit_MPU6050 mpu;

void setup(void) {
  Serial.begin(115200);

  // Setup wifi
  WiFi.mode(WIFI_STA);
  wifiMulti.addAP(WIFI_SSID, WIFI_PASSWORD);

  Serial.print("Connecting to wifi");
  while (wifiMulti.run() != WL_CONNECTED) {
    Serial.print(".");
    delay(100);
  }
  Serial.println();

  // Accurate time is necessary for certificate validation and writing in batches
  // We use the NTP servers in your area as provided by: https://www.pool.ntp.org/zone/
  // Syncing progress and the time will be printed to Serial.
  timeSync(TZ_INFO, "pool.ntp.org", "time.nis.gov");

  // Check server connection
  if (client.validateConnection()) {
    Serial.print("Connected to InfluxDB: ");
    Serial.println(client.getServerUrl());
  } else {
    Serial.print("InfluxDB connection failed: ");
    Serial.println(client.getLastErrorMessage());
  }

  // Try to initialize!
  if (!mpu.begin()) {
    Serial.println("Failed to find MPU6050 chip");
    while (1) {
      delay(10);
    }
  }

  mpu.setAccelerometerRange(MPU6050_RANGE_8_G);
  mpu.setGyroRange(MPU6050_RANGE_250_DEG);
  mpu.setFilterBandwidth(MPU6050_BAND_21_HZ);
  Serial.println("");
  delay(2000);
}

void loop() {
  /* Get new sensor events with the readings */
  sensors_event_t a, g, temp;
  mpu.getEvent(&a, &g, &temp);

  // Clear fields for reusing the point. Tags will remain untouched
  sensor.clearFields();

  sensor.addField("AcceX", a.acceleration.x);
  sensor.addField("AcceY", a.acceleration.y);
  sensor.addField("AcceZ", a.acceleration.z);
  sensor.addField("GyroX", g.gyro.x);
  sensor.addField("GyroY", g.gyro.y);
  sensor.addField("GyroZ", g.gyro.z);
  // Agrege aquí el campo requerido para crear la variable de temperatura

  // If no Wifi signal, try to reconnect it
  if ((WiFi.RSSI() == 0) && (wifiMulti.run() != WL_CONNECTED)) {
    Serial.println("Wifi connection lost");
  }

  if (client.writePoint(sensor)) {
    Serial.println("Written on the server:");
    Serial.println("Acelerometro:");
    Serial.print(a.acceleration.x);
    Serial.print(",");
    Serial.print(a.acceleration.y);
    Serial.print(",");
    Serial.println(a.acceleration.z);
    Serial.println("Giroscopio:");
    Serial.print(g.gyro.x);
    Serial.print(",");
    Serial.print(g.gyro.y);
    Serial.print(",");
    Serial.println(g.gyro.z);
    // Agregue aquí el codigo necesario para mostrar en la consola los datos de temperatura enviados el servidor
    Serial.println("");
  } else {
    Serial.print("InfluxDB write failed: ");
    Serial.println(client.getLastErrorMessage());
  }

  //Wait 2s
  Serial.println("Wait 2s");
  delay(2000);
}