from machine import Pin, I2C

import utime as time
from DHT11 import DHT11, InvalidChecksum
 
WIDTH  = 128                                            # oled display width
HEIGHT = 64                                             # oled display height
 
# i2c = I2C(0, scl=Pin(9), sda=Pin(8), freq=200000)       # Init I2C using pins GP8 & GP9 (default I2C0 pins)
# print("I2C Address      : "+hex(i2c.scan()[0]).upper()) # Display device address
# print("I2C Configuration: "+str(i2c))                   # Display I2C config
 
 
#oled = SSD1306_I2C(WIDTH, HEIGHT, i2c)                  # Init oled display
 
while True:
    time.sleep(1)
    pin = Pin(0, Pin.OUT, Pin.PULL_DOWN)
    sensor = DHT11(pin)
    t  = (sensor.temperature)
    h = (sensor.humidity)
    print("Temperature: {}".format(sensor.temperature))
    print("Humidity: {}".format(sensor.humidity))
    # Clear the oled display in case it has junk on it.
    #oled.fill(0)       
    
    # # Add some text
    # oled.text("Temp: ",10,10)
    # oled.text(str(sensor.temperature),50,10)
    # oled.text("*C",90,10)
    print('temp',sensor.temperature)
    
    # oled.text("Humi: ",10,30)
    # oled.text(str(sensor.humidity),50,30)
    # oled.text("%",90,30)
    
    print("humidity",sensor.humidity)
    time.sleep(1)
    # oled.show()