/* 
  Sketch generated by the Arduino IoT Cloud Thing "Untitled"
  https://create.arduino.cc/cloud/things/2ce65d48-e84c-4cc8-a648-70a66da00ce3 

  Arduino IoT Cloud Variables description

  The following variables are automatically generated and updated when changes are made to the Thing

  int random_value;
  bool led_switch;

  Variables which are marked as READ/WRITE in the Cloud Thing will also have functions
  which are called when their values are changed from the Dashboard.
  These functions are generated with the Thing and added at the end of this sketch.
*/

#include "thingProperties.h"
#include <Arduino.h>
#include <HTTPClient.h>
#include "DHT.h"
#include <ESP32Servo.h>
#define DHT22PIN 2


DHT dht(DHT22PIN, DHT22);

const char* ssid = "Wokwi-GUEST";
const char* password = "";
HTTPClient client;
int LED=14;

const int servoPin = 13;

Servo servo;

void setup() {
  Serial.begin(115200);
  servo.attach(servoPin, 500, 2400);
  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid,password);
  // Wait for connection
  while(WiFi.status() != WL_CONNECTED) {
    delay(500);
  }
    pinMode(LED, OUTPUT);
    pinMode(14, OUTPUT);
    pinMode(12, OUTPUT);

  // Initialize serial and wait for port to open:
  Serial.begin(9600);
  // This delay gives the chance to wait for a Serial Monitor without blocking if none is found
  delay(1500); 
  // Defined in thingProperties.h
  initProperties();
  // Connect to Arduino IoT Cloud
  ArduinoCloud.begin(ArduinoIoTPreferredConnection);
  
  /*
     The following function allows you to obtain more information
     related to the state of network and IoT Cloud connection and errors
     the higher number the more granular information you’ll get.
     The default is 0 (only errors).
     Maximum is 4
 */
  setDebugMessageLevel(2);
  ArduinoCloud.printDebugInfo();
}

void loop() {
   h = dht.readHumidity();
  t = dht.readTemperature();
  ArduinoCloud.update();
  // Your code here 
  
  delay(500);
}
/*
  Since LedSwitch is READ_WRITE variable, onLedSwitchChange() is
  executed every time a new value is received from IoT Cloud.
*/
void onServomotorChange()  {
servo.write(servomotor);
}

/*
  Since HdSensor is READ_WRITE variable, onHdSensorChange() is
  executed every time a new value is received from IoT Cloud.
*/
void onHdSensorChange()  {
}

/*
  Since Led1 is READ_WRITE variable, onLed1Change() is
  executed every time a new value is received from IoT Cloud.
*/
void onLed1Change()  {
  digitalWrite(12,led1);
  // Add your code here to act upon Led1 change
}

/*
  Since Led2 is READ_WRITE variable, onLed2Change() is
  executed every time a new value is received from IoT Cloud.
*/
void onLed2Change()  {
analogWrite(14,led2);
}


/*
  Since H is READ_WRITE variable, onHChange() is
  executed every time a new value is received from IoT Cloud.
*/
void onHChange()  {
  // Add your code here to act upon H change
}

/*
  Since T is READ_WRITE variable, onTChange() is
  executed every time a new value is received from IoT Cloud.
*/
void onTChange()  {
  // Add your code here to act upon T change
}