/*************************************************************

  This is a simple demo of sending and receiving some data.
  Be sure to check out other examples!
 *************************************************************/

/* Fill-in information from Blynk Device Info here */
/*

#define BLYNK_TEMPLATE_ID           "TMPL33OV2i9Tm"
#define BLYNK_TEMPLATE_NAME         "Quickstart Template"
#define BLYNK_AUTH_TOKEN            "psNTz7Ly3C8sLnYPKfpTiZj4ya22LyQ8"

*/

#define BLYNK_TEMPLATE_ID "TMPL3o6YyEaqm"
#define BLYNK_TEMPLATE_NAME "LED Test1"
#define BLYNK_AUTH_TOKEN "KlzFvONpE-2_hbR39TE2CyMTOq7NHqa9"

/* Comment this out to disable prints and save space */
#define BLYNK_PRINT Serial
unsigned int value = 0;

#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>


char ssid[] = "Wokwi-GUEST";
char pass[] = "";



BlynkTimer timer;

// This function is called every time the Virtual Pin 0 state changes
BLYNK_WRITE(V0)
{
  
  // Set incoming value from pin V0 to a variable
  //value = param.asInt();
  Serial.println("Inside Blynk Write");

  if(param.asInt() == 1)
  {
      Serial.println("Blynk Write: Value is 1");
      digitalWrite(2, HIGH); 
  } 
  else
  {
    Serial.println("Blynk Write: Value is 0");
    digitalWrite(2, LOW);
  }

  // Update state
  //Blynk.virtualWrite(V0, value);
}

// This function is called every time the device is connected to the Blynk.Cloud
BLYNK_CONNECTED()
{
   Blynk.syncVirtual(V0);
   Serial.println("Inside Blynk Connected");
  // Change Web Link Button message to "Congratulations!"
  //Blynk.setProperty(V3, "offImageUrl", "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations.png");
  //Blynk.setProperty(V3, "onImageUrl",  "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations_pressed.png");
  //Blynk.setProperty(V3, "url", "https://docs.blynk.io/en/getting-started/what-do-i-need-to-blynk/how-quickstart-device-was-made");
}

// This function sends Arduino's uptime every second to Virtual Pin 2.
void myTimerEvent()
{
  // You can send any value at any time.
  // Please don't send more that 10 values per second.
  //Blynk.virtualWrite(V2, millis() / 1000);
  Blynk.virtualWrite(V0, millis() / 1000);
}

////////////////////////

void setup()
{

  // Debug console
  pinMode(2, OUTPUT);
  Serial.begin(115200);
  Serial.println("Serial Prints Starts...");
  
  Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass);
  // You can also specify server:
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, "blynk.cloud", 80);
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, IPAddress(192,168,1,100), 8080);

  // Setup a function to be called every second
  //timer.setInterval(1000L, myTimerEvent);
}

void loop()
{
  Blynk.run();
//  timer.run();
  // You can inject your own code or combine it with other sketches.
  // Check other examples on how to communicate with Blynk. Remember
  // to avoid delay() function!
}