const int lm35Pin = A0; // Assign LM35 pin to analog pin A0
const float referenceVoltage = 5.0; // Set reference voltage to 5.0V (change accordingly)
const float temperatureFactor = 100.0; // 10mV per degree Celsius for LM35

void setup() {
  Serial.begin(9600); // Initialize serial communication at 9600 baud rate
}

void loop() {
  int lm35Value = analogRead(lm35Pin); // Read the analog value from the LM35
  float voltage = (lm35Value / 1023.0) * referenceVoltage; // Convert ADC value to voltage
  float temperatureC = voltage * temperatureFactor; // Convert voltage to temperature in Celsius
  
  // Print the analog value, voltage, and temperature to Serial Monitor
  Serial.print("LM35 Value (10-bit): ");
  Serial.print(lm35Value);
  Serial.print(", Voltage: ");
  Serial.print(voltage);
  Serial.print("V, Temperature: ");
  Serial.print(temperatureC);
  Serial.println(" °C");
  
  delay(1000); // Delay for 1 second
}