#include "STM32C0.h"
#include "TemperatureSensor.h"
#include "GasSensor.h"
#include "RGBSensor.h"
#include "Buzzer.h"

// Define sensor classes
class TemperatureSensor {
public:
    void init() {
        // Initialize temperature sensor GPIO pins
        // Example: GPIO initialization code
        pinMode(TEMP_SENSOR_PIN, INPUT);
        digitalWrite(TEMP_SENSOR_PIN, LOW);
    }

    float readTemperature() {
        // Read temperature from sensor and return
        // Example: Code to read temperature from the sensor
        int sensorValue = analogRead(TEMP_SENSOR_PIN); // Example for analog sensor
        float temperature = map(sensorValue, 0, 1023, -40, 125); // Example mapping for temperature range -40°C to 125°C
        return temperature;
        
        return 25.0; // Example value, replace with actual reading
    }
};

class GasSensor {
public:
    void init() {
        // Initialize gas sensor GPIO pins
        // Example: GPIO initialization code
    }

    float readConcentration() {
        // Read gas concentration from sensor and return
        // Example: Code to read gas concentration from the sensor
        return 50.0; // Example value, replace with actual reading
    }
};

class RGBSensor {
public:
    void init() {
        // Initialize RGB sensor GPIO pins
        // Example: GPIO initialization code
    }

    RGBColor readColor() {
        // Read RGB color from sensor and return
        // Example: Code to read RGB color from the sensor
        return RGBColor(255, 0, 0); // Example color, replace with actual reading
    }

    void setColor(RGBColor color) {
        // Set RGB LED color
        // Example: Code to set the color of the RGB LED
    }
};

class Buzzer {
public:
    void init() {
        // Initialize buzzer GPIO pin
        // Example: GPIO initialization code
    }

    void activate() {
        // Activate the buzzer
        // Example: Code to activate the buzzer
    }
};

// Define sensor objects
TemperatureSensor tempSensor;
GasSensor gasSensor;
RGBSensor rgbSensor;
Buzzer buzzer;

void setup() {
    // Initialize sensor GPIO pins
    tempSensor.init();
    gasSensor.init();
    rgbSensor.init();
    buzzer.init();
}

void loop() {
    // Read sensor values
    float temperature = tempSensor.readTemperature();
    float gasConcentration = gasSensor.readConcentration();
    RGBColor rgb = rgbSensor.readColor();

    // Determine air quality based on sensor readings
    // Implement your air quality algorithm here

    // Control RGB LED based on air quality
    rgbSensor.setColor(rgb);

    // Activate buzzer based on air quality
    buzzer.activate();
}