#include <stdio.h>

#define LED_PIN 25  // Assuming LED is connected to pin 25 (modify if different)
#define DELAY_MS 500 // Delay in milliseconds between LED blinks

int main() {
    int minute;
    int blink_count;

    for (minute = 1; minute <= 3; minute++) {
        // Determine blink count based on minute
        if (minute == 1) {
            blink_count = 10;
        } else if (minute == 2) {
            blink_count = 20;
        } else {
            blink_count = 30;
        }

        printf("Minute %d: Blinking LED %d times\n", minute, blink_count);

        // Blink LED for specified number of times in this minute
        for (int i = 0; i < blink_count; i++) {
            printf("LED On\n");
            // Simulate LED on by printing a message
            // (replace with actual LED control code for hardware)

            // Delay for half the cycle (LED on)
            for (int j = 0; j < DELAY_MS/2; j++) {
                // Simulate delay (replace with actual delay function for hardware)
            }

            printf("LED Off\n");
            // Simulate LED off by printing a message
            // (replace with actual LED control function for hardware)

            // Delay for half the cycle (LED off)
            for (int j = 0; j < DELAY_MS/2; j++) {
                // Simulate delay (replace with actual delay function for hardware)
            }
        }

        // Delay for 1 second between minutes
        printf("Waiting 1 second before next minute\n");
        for (int j = 0; j < 1000; j++) {
            // Simulate delay of 1 second (replace with actual delay function for hardware)
        }
    }

    printf("Finished blinking LED\n");

    return 0;
}