#define pinled 2
#define pinPBA 32
#define pinPBB 35
unsigned char PB_DataA, PB_DataB;
void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  pinMode(2, OUTPUT);
  pinMode(pinPBA, INPUT_PULLUP);
  pinMode(pinPBB, INPUT_PULLUP);
  pinMode(pinled, OUTPUT);
}

void loop() {
  // put your main code here, to run repeatedly:
  PB_DataA = digitalRead(pinPBA);
  PB_DataA = digitalRead(pinPBB);
  Serial.print("DataA = ");
  Serial.print(PB_DataA);
  Serial.print("DataB = ");
  Serial.println(PB_DataB);
  if ((PB_DataA == LOW) && (PB_DataB == LOW))
  {
    //Serial.println("Tombol PB A di tekan...");
    digitalWrite(pinled, LOW);
  }
  else {
    //Serial.println("Tombol PB A di lepas...");
    digitalWrite(pinled, HIGH);  //led on
  }

  delay(1000); // this speeds up the simulation
}