#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <DHT.h>
#define DHT_PIN 15
#define DHT_TYPE 22
#define redLed 35
#define greenLed 25

DHT dht(DHT_PIN, DHT_TYPE);
Adafruit_SSD1306 display(128,64, &Wire, -1);

void setup() {
  Serial.begin(9600);
  pinMode(redLed, OUTPUT);
  pinMode(greenLed, OUTPUT);
  dht.begin();
  delay(2000);
  if (!display.begin(SSD1306_SWITCHCAPVCC,0x3c)){
    Serial.println("Can't read details");
  }
}

void loop() {
  float humid = dht.readHumidity();
  float tempre = dht.readTemperature();

  Serial.println("Humidity: ");
  Serial.println(humid);
  Serial.println("Temperature: ");
  Serial.println(tempre);
  delay(1000);

  display.clearDisplay();
  display.setTextSize(1);
  display.setCursor(0,10);
  display.setTextColor(WHITE);

  display.println("Humidity: " + String(humid));
  display.println("Temperature: " + String(tempre));
  display.display();

  if(humid <= 50) {
    digitalWrite(greenLed, HIGH);
  }else{
    digitalWrite(greenLed, LOW);
  }

  if(tempre >= 30) {
    digitalWrite(redLed, HIGH);
  }else{
    digitalWrite(redLed, LOW);
  }
}