// Pin connected to the LED
const int light1 = 16;
const int light2 = 17;
const int light3 = 18;
const int light4 = 19;
const int light5 = 21;
const int light6 = 22;
const int light7 = 23;
const int motor_down = 25;
const int motor_up = 26;

#define MOTOR_DELAY 60000  //<------- Uda inna velava Adjust karnna methanin

// Setup function runs once the start 
void setup() {
// Initialize the digital pin as an output 
  pinMode(light1, OUTPUT);
  pinMode(light2, OUTPUT);
  pinMode(light3, OUTPUT);
  pinMode(light4, OUTPUT);
  pinMode(light5, OUTPUT);
  pinMode(light6, OUTPUT);
  pinMode(light7, OUTPUT);
  pinMode(motor_up, OUTPUT);
  pinMode(motor_down, OUTPUT);
}
// Loop functuion runs repeatedly
void loop() {
  //on all led's
  all_on();
  // Mortor Down
  digitalWrite(motor_down, HIGH);
  delay(120000);   //<----------------  pahalata yana Relay eka allan inna velava Motor eka karakavanna 
  digitalWrite(motor_down, LOW);
  all_off();
  delay(300);
  // Turn the LED on 
  digitalWrite(light1, HIGH);
  // Wait for 1 second
  delay(1000);
  // Turn the LED off
  digitalWrite(light2, HIGH);
  // Wait for 1 second
  delay(1000);
  // Turn the LED on 
  digitalWrite(light3, HIGH);
  // Wait for 1 second
  delay(1000);
  // Turn the LED off
  digitalWrite(light4, HIGH);
  // Wait for 1 second
  delay(1000);
  // Turn the LED on 
  digitalWrite(light5, HIGH);
  // Wait for 1 second
  delay(1000);
  // Turn the LED off
  digitalWrite(light6, HIGH);
  // Wait for 1 second
  delay(1000);
  digitalWrite(light7, HIGH);
  
  digitalWrite(motor_up, HIGH);
  delay(120000); //<------------------- Udata yana Relay eka allan inna velaava 
  digitalWrite(motor_up, LOW);
  delay(MOTOR_DELAY); //<--------------- Uda kochchara vela innavada kiyala venas karna Delay eka udin venas karanna
}

void all_off(){

digitalWrite(light1, LOW);
digitalWrite(light2, LOW); 
digitalWrite(light3, LOW);
digitalWrite(light4, LOW); 
digitalWrite(light5, LOW);
digitalWrite(light6, LOW);
digitalWrite(light7, LOW);

}

void all_on(){

digitalWrite(light1, HIGH);
digitalWrite(light2, HIGH); 
digitalWrite(light3, HIGH);
digitalWrite(light4, HIGH); 
digitalWrite(light5, HIGH);
digitalWrite(light6, HIGH);
digitalWrite(light7, HIGH);

}