#include <WiFi.h>
#include <HTTPClient.h>
#include <DHTesp.h>
//請修改以下參數----
char ssid[] ="Wokwi-GUEST";
char password[] = "";
//請修改為你自己的API Key
String url = "https://hook.us1.make.com/fpvdbvpde6pzvh92liy05rejuintmwib";
const int DHT_PIN = 15;//修改腳位為15
DHTesp dhtSensor;
const char* token = "jtdsDA0dyCOplaEpBlu64ifYrDNZRvRQUUF031R2mYe";
#define LIGHT_SENSOR_PIN 36
void setup()
{
  dhtSensor.setup(DHT_PIN, DHTesp:: DHT22);
  Serial.begin(115200);
  Serial.print("開始連線到無線網路SSID:");
  Serial.println(ssid);
  WiFi.mode (WIFI_STA);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
  Serial.print(".");
  delay(1000);
  }
  Serial.println("連線完成");
}
void loop()
{
  HTTPClient http2;
  http2.begin("https://notify-api.line.me/api/notify");
  http2.addHeader("Authorization", "Bearer " + String(token));
  http2.addHeader("Content-Type", "application/x-www-form-urlencoded");
  //http2.POST("溫度計讀取成功:"+(int)temperature+" *C, "+(int)humidity+" H, "+"亮度: "+analogValue);

  int analogValue = analogRead(LIGHT_SENSOR_PIN);
  Serial.println("=============");
  byte temperature = 0;
  byte humidity = 0;
  TempAndHumidity data =dhtSensor.getTempAndHumidity();
  temperature = data.temperature;
  humidity = data.humidity;
  //讀取成功,將溫濕度顯示在序列視窗
  Serial.print("溫度計讀取成功:");
  Serial.print((int) temperature); Serial.print(" *C, ");
  Serial.print((int) humidity); Serial.print(" H, ");
  Serial.print("亮度: ");Serial.println(analogValue);   
  //開始傳送到thingspeak
  Serial.println("啟動網頁連線");
  HTTPClient http;

  //將溫度及濕度以HTTP Get參數方式補人網址後方
  String url1 = url + "?name=" + "IoT22" + "&value1=" + (int)temperature + "&value2=" + (int)humidity +"&value3=" + (int)analogValue;
  //http client取得網頁內容
  http.begin(url1);
  int httpCode = http.GET();
  Serial.print(httpCode);
  if (httpCode == HTTP_CODE_OK) {
  //讀取網頁內容到payload
    String payload = http.getString();
    //將內容顯示出來
    Serial.print("網頁內容=");
    Serial.println(payload);    
    String message = "溫度計讀取成功：";
    message += "\n溫度=" + String(((int)temperature)) + " *C";
    message += "\n濕度=" + String(((int)humidity)) + " H";
    message += "\n亮度=" + String(((int)analogValue));
    http2.POST("message="+message);
  } else {
  //讀取失敗
  Serial.println("網路傳送失敗");
  }
  http.end();
  http2.end();

  delay(20000);//休息20秒
}