// Pin connected to the LED
const int light1 = 18;
const int light2 = 19;
const int light3 = 21;
const int light4 = 3;
const int light5 = 22;
const int light6 = 23;
const int light7 = 23;
const int motor_down = 34;
const int motor_up = 35;

#define MOTOR_DELAY 120000  //<------- Uda inna velava Adjust karnna methanin

// Setup function runs once the start 
void setup() {
// Initialize the digital pin as an output 
  pinMode(light1, OUTPUT);
  pinMode(light2, OUTPUT);
  pinMode(light3, OUTPUT);
  pinMode(light4, OUTPUT);
  pinMode(light5, OUTPUT);
  pinMode(light6, OUTPUT);
  pinMode(light7, OUTPUT);
  pinMode(motor_up, OUTPUT);
  pinMode(motor_down, OUTPUT);
}
// Loop functuion runs repeatedly
void loop() {
  
  // Trun on all LED's
  digitalWrite(light1, HIGH);
 
  digitalWrite(light2, HIGH); 
  
  digitalWrite(light3, HIGH);
  
  digitalWrite(light4, HIGH); 
 
  digitalWrite(light5, HIGH);
  
  digitalWrite(light6, HIGH);
 
  digitalWrite(light7, HIGH);
  
  digitalWrite(motor_down, HIGH); //Trun on down Motor Relay
  delay(MOTOR_DELAY); //wait for 1 minitue
   // trun off all Led's
  digitalWrite(light1, LOW);
  
  digitalWrite(light2, LOW); 
 
  digitalWrite(light3, LOW);

  digitalWrite(light4, LOW); 
 
  digitalWrite(light5, LOW);

  digitalWrite(light6, LOW);

  digitalWrite(light7, LOW);

  digitalWrite(motor_down, LOW); // Trun off down Motor Relay
   
  digitalWrite(light1, HIGH);
  // Wait for 1 second
  delay(1000);
  // Turn the LED off
  digitalWrite(light2, HIGH);
  // Wait for 1 second
  delay(1000);
  // Turn the LED on 
  digitalWrite(light3, HIGH);
  // Wait for 1 second
  delay(1000);
  // Turn the LED off
  digitalWrite(light4, HIGH);
  // Wait for 1 second
  delay(1000);
  // Turn the LED on 
  digitalWrite(light5, HIGH);
  // Wait for 1 second
  delay(1000);
  // Turn the LED off
  digitalWrite(light6, HIGH);
  // Wait for 1 second
  delay(1000);
  //Turn the LED on 
  digitalWrite(light7, HIGH);

  digitalWrite(motor_up,HIGH); // Trurn ON up relay
  delay(MOTOR_DELAY);                // wait for 1 minitue
  digitalWrite(motor_up, LOW); // Turn OFF up Relay
}