#include<IRremote.h>
int pinIR=2;
int remoteValue;
int l1=13,l2=12,l3=11,l4=10,l5=9,l6=8;


void setup() {
   pinMode(pinIR,INPUT);
  IrReceiver.begin(pinIR);
  Serial.begin(9600);
  
  pinMode(l1,OUTPUT);
  pinMode(l2,OUTPUT);
  pinMode(l3,OUTPUT);
  pinMode(l4,OUTPUT);
  pinMode(l5,OUTPUT);
  pinMode(l6,OUTPUT);
  
}

void loop() {
  if(IrReceiver.decode()){
  remoteValue=IrReceiver.decodedIRData.command;
  Serial.println(remoteValue);
  IrReceiver.resume();
  switch(remoteValue){
    
    case 104:
    digitalWrite(l1, HIGH);
    digitalWrite(l2, HIGH);
    digitalWrite(l3, HIGH);
    digitalWrite(l4, HIGH);
    digitalWrite(l5, HIGH);
    digitalWrite(l6, HIGH);
    
    break;
    case 162:
    digitalWrite(l1, LOW);
    digitalWrite(l2, LOW);
    digitalWrite(l3, LOW);
    digitalWrite(l4, LOW);
    digitalWrite(l5, LOW);
    digitalWrite(l6, LOW);
    
    break;
    case 48:
    digitalWrite(l1, !digitalRead(l1));
    
    break;
    case 24:
    digitalWrite(l2, !digitalRead(l2));
    
    break;
    case 122:
    digitalWrite(l3, !digitalRead(l3));
   
    break;
    case 16:
    digitalWrite(l4, !digitalRead(l4));
   
    break;
    case 56:
    digitalWrite(l5, !digitalRead(l5));
    
    break;
    case 90:
    digitalWrite(l6, !digitalRead(l6));
   
    break;

    case 144:
    digitalWrite(l1, HIGH);
    delay(1000);
    digitalWrite(l1, LOW);
    delay(1000);
    digitalWrite(l2, HIGH);
    delay(1000);
    digitalWrite(l2, LOW);
    delay(1000);
    digitalWrite(l3, HIGH);
    delay(1000);
    digitalWrite(l3, LOW);
    delay(1000);
    digitalWrite(l4, HIGH);
    delay(1000);
    digitalWrite(l4, LOW);
    delay(1000);
    digitalWrite(l5, HIGH);
    delay(1000);
    digitalWrite(l5, LOW);
    delay(1000);
    digitalWrite(l6, HIGH);
    delay(1000);
    digitalWrite(l6, LOW);
    
    break;
    case 224:
    for (int s=0;s<5;s++){
      for (int i=8; i<=13;i++){
      digitalWrite(i, HIGH);
      delay(500);}
      digitalWrite(i,LOW);
      delay(500);
    }
    break;

    }
  }
}