#include <stdio.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_log.h"
#include "led_strip.h"

static const char *TAG = "HK";

// GPIO assignment
#define LED_STRIP_BLINK_GPIO  4
// Numbers of the LED in the strip
#define LED_STRIP_LED_NUMBERS 1
// 10MHz resolution, 1 tick = 0.1us (led strip needs a high resolution)
#define LED_STRIP_RMT_RES_HZ  (10 * 1000 * 1000)

led_strip_handle_t configure_led(void)
{
    // LED strip general initialization, according to your led board design
    led_strip_config_t strip_config = {
        .strip_gpio_num = LED_STRIP_BLINK_GPIO,   // The GPIO that connected to the LED strip's data line
        .max_leds = LED_STRIP_LED_NUMBERS,        // The number of LEDs in the strip,
        .led_pixel_format = LED_PIXEL_FORMAT_GRB, // Pixel format of your LED strip
        .led_model = LED_MODEL_WS2812,            // LED strip model
        .flags.invert_out = false,                // whether to invert the output signal
    };

    // LED strip backend configuration: RMT
    led_strip_rmt_config_t rmt_config = {
#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0)
        .rmt_channel = 0,
#else
        .clk_src = RMT_CLK_SRC_DEFAULT,        // different clock source can lead to different power consumption
        .resolution_hz = LED_STRIP_RMT_RES_HZ, // RMT counter clock frequency
        .flags.with_dma = false,               // DMA feature is available on ESP target like ESP32-S3
#endif
    };

    // LED Strip object handle
    led_strip_handle_t led_strip;
    ESP_ERROR_CHECK(led_strip_new_rmt_device(&strip_config, &rmt_config, &led_strip));
    ESP_LOGI(TAG, "Created LED strip object with RMT backend");
    return led_strip;
}

void app_main(void)
{
    ESP_LOGI(TAG,"ws2812 start");
    led_strip_handle_t led_strip = configure_led();
    bool led_on_off = false;

    // 设置亮度为 50%
    uint8_t brightness = 50; // 百分比
    uint8_t red = (0 * brightness) / 100;
    uint8_t green = (0 * brightness) / 100;
    uint8_t blue = (139 * brightness) / 100;

    while (1)
    {
        ESP_LOGI(TAG,"ws2812 test");
        if (led_on_off) {
            /* Set the LED pixel using RGB from 0 (0%) to 255 (100%) for each color */
            for (int i = 0; i < LED_STRIP_LED_NUMBERS; i++) {
                ESP_ERROR_CHECK(led_strip_set_pixel(led_strip, i, red, green, blue));
            }
            /* Refresh the strip to send data */
            ESP_ERROR_CHECK(led_strip_refresh(led_strip));
            ESP_LOGI(TAG, "LED ON!");
        } else {
            /* Set all LED off to clear all pixels */
            ESP_ERROR_CHECK(led_strip_clear(led_strip));
            ESP_LOGI(TAG, "LED OFF!");
        }

        led_on_off = !led_on_off;
        vTaskDelay(pdMS_TO_TICKS(500));
    }
    

}