#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
Adafruit_SSD1306 display(128, 64, &Wire, -1);


#include "DHT.h"

#define DHTPIN 7    
#define DHTTYPE DHT22   
 //DHT 22  (AM2302), AM2321

DHT dht(DHTPIN, DHTTYPE);

void setup() {
  Serial.begin(115200);
  

  dht.begin();
  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
  display.clearDisplay();
  display.setTextSize(2);
  display.setTextColor(SSD1306_WHITE);
  display.display();
}

void loop() {
  float temperatura = dht.readTemperature();
  float humidity = dht.readHumidity();

  
  if (isnan(temperatura) || isnan(humidity)) {
    Serial.println(F("Failed to read from DHT sensor!"));
    return;
  }

  Serial.print(F("Humedad: "));
  Serial.print(humidity);
  Serial.print(F("%  Temperatura: "));
  Serial.print(temperatura);
  Serial.println(F("°C "));

  display.clearDisplay();
  display.setCursor(0, 0);
  display.print("Temp: ");
  display.print(temperatura);
  display.println(" C");
  display.println(" ");
  display.print("Humedad: ");
  display.print(humidity);
  display.println(" %");
  display.display();
  delay(2000);
}