// Just a simple slide-switch demo

/*void setup() {
  pinMode(2, OUTPUT);
  pinMode(5, INPUT_PULLUP);
}

void loop() {
  digitalWrite(2, digitalRead((5)));
}*/
#define BLYNK_TEMPLATE_ID "TMPL3lpVgfdNp"
#define BLYNK_TEMPLATE_NAME "switch control via cloud"
#define BLYNK_AUTH_TOKEN "-UzJtPnmKvyib1DaFskUxBdl_wjtj0Ax"
/* Comment this out to disable prints and save space */
#define BLYNK_PRINT Serial
unsigned int value = 0;

#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>

// Your WiFi credentials.

char ssid[] = "Wokwi-GUEST";
char pass[] = "";

BlynkTimer timer;

// This function is called every time the Virtual Pin 0 state changes
BLYNK_WRITE(V1)
{
  // Set incoming value from pin V0 to a variable
  //value = param.asInt();
  Serial.println("Inside Blynk Write");
  if(param.asInt() == 1)
  {
      Serial.println("Blynk Write: Value is 1");
      digitalWrite(2, digitalRead((5)));
     // digitalWrite(2, HIGH); 
  } 
  else
  {
    Serial.println("Blynk Write: Value is 0");
   digitalWrite(2, LOW);
   //digitalWrite(2, digitalRead((5)));
  }

  //Update state
  //Blynk.virtualWrite(V1, value);
}

// This function is called every time the device is connected to the Blynk.Cloud
BLYNK_CONNECTED()
{
   Blynk.syncVirtual(V1);
   Serial.println("Inside Blynk Connected");
  // Change Web Link Button message to "Congratulations!"
  //Blynk.setProperty(V3, "offImageUrl", "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations.png");
  //Blynk.setProperty(V3, "onImageUrl",  "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations_pressed.png");
  //Blynk.setProperty(V3, "url", "https://docs.blynk.io/en/getting-started/what-do-i-need-to-blynk/how-quickstart-device-was-made");
}

// This function sends Arduino's uptime every second to Virtual Pin 2.
void myTimerEvent()
{
  // You can send any value at any time.
  // Please don't send more that 10 values per second.
  //Blynk.virtualWrite(V2, millis() / 1000);
  Blynk.virtualWrite(V1, millis() / 1000);
}

void setup()
{

  // Debug console
  //pinMode(2, OUTPUT);
  pinMode(5, INPUT_PULLUP);
  pinMode(2, OUTPUT);
  Serial.begin(115200);
  Serial.println("Serial Prints Starts...");
  Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass);
  // You can also specify server:
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, "blynk.cloud", 80);
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, IPAddress(192,168,1,100), 8080);
  // Setup a function to be called every second
  //timer.setInterval(1000L, myTimerEvent);
}

void loop()
{
  Blynk.run();
//  timer.run();
  // You can inject your own code or combine it with other sketches.
  // Check other examples on how to communicate with Blynk. Remember
  // to avoid delay() function!
}