#include <Wire.h>
#include <LiquidCrystal_I2C.h>
#include <RTClib.h>
#include <DHT.h>
#include <Adafruit_NeoPixel.h>

// Define pin numbers
#define DHTPIN 13
#define DHTTYPE DHT22
#define LDR_PIN A0
#define BUTTON1_PIN A8
#define BUTTON2_PIN A9
#define BUTTON3_PIN A10
#define BUTTON4_PIN A11
#define LED_PIN 7
#define LED_RING_PIN 6
#define LED_COUNT 16

// Initialize the LCD
LiquidCrystal_I2C lcd(0x27, 20, 4);

// Initialize the RTC
RTC_DS1307 rtc;

// Initialize the DHT22
DHT dht(DHTPIN, DHTTYPE);

// Initialize the LED ring
Adafruit_NeoPixel ring(LED_COUNT, LED_RING_PIN, NEO_GRB + NEO_KHZ800);

// Menu states
enum MenuState {
  MENU_DASHBOARD,
  MENU_DATETIME,
  MENU_TEMPERATURE,
  MENU_HUMIDITY,
  MENU_BRIGHTNESS,
  MENU_COUNT
};

MenuState currentMenu = MENU_DASHBOARD;
bool inMenu = true;
int currentPage = 0;
bool alarmTriggered = false;

void setup() {
  // Initialize serial communication
  Serial.begin(9600);

  // Initialize LCD
  lcd.init();
  lcd.backlight();

  // Initialize RTC
  if (!rtc.begin()) {
    lcd.print("Couldn't find RTC");
    while (1);
  }
  if (!rtc.isrunning()) {
    lcd.print("RTC is NOT running!");
    rtc.adjust(DateTime(F(__DATE__), F(__TIME__)));
  }

  // Initialize DHT22
  dht.begin();

  // Initialize LED
  pinMode(LED_PIN, OUTPUT);
  digitalWrite(LED_PIN, LOW);

  // Initialize LED ring
  ring.begin();
  ring.show();

  // Initialize buttons
  pinMode(BUTTON1_PIN, INPUT_PULLUP);
  pinMode(BUTTON2_PIN, INPUT_PULLUP);
  pinMode(BUTTON3_PIN, INPUT_PULLUP);
  pinMode(BUTTON4_PIN, INPUT_PULLUP);

  // Show initial menu
  displayMenu();
}

void loop() {
  checkAlarmConditions();
  
  if (digitalRead(BUTTON1_PIN) == LOW) { // Navigate up
    delay(200);
    if (inMenu) {
      currentMenu = (MenuState)((currentMenu - 1 + MENU_COUNT) % MENU_COUNT);
      if (currentMenu == MENU_BRIGHTNESS) {
        currentPage = 1;
      } else {
        currentPage = 0;
      }
      displayMenu();
    }
  }

  if (digitalRead(BUTTON3_PIN) == LOW) { // Navigate down
    delay(200);
    if (inMenu) {
      currentMenu = (MenuState)((currentMenu + 1) % MENU_COUNT);
      if (currentMenu == MENU_DASHBOARD) {
        currentPage = 0;
      } else if (currentMenu == MENU_BRIGHTNESS) {
        currentPage = 1;
      }
      displayMenu();
    }
  }

  if (digitalRead(BUTTON2_PIN) == LOW) { // Return to menu
    delay(200);
    if (!inMenu) {
      inMenu = true;
      displayMenu();
    }
  }

  if (digitalRead(BUTTON4_PIN) == LOW) { // Select menu item
    delay(200);
    if (inMenu) {
      inMenu = false;
      displayMenuContent(currentMenu);
    }
  }

  if (!inMenu && currentMenu == MENU_DASHBOARD) {
    displayDashboard();
    delay(1000); // Update dashboard every second
  }
}

void displayMenu() {
  lcd.clear();
  if (currentPage == 0) {
    lcd.setCursor(0, 0);
    if (currentMenu == MENU_DASHBOARD) lcd.print("- ");
    lcd.print("1. Dashboard");
    lcd.setCursor(0, 1);
    if (currentMenu == MENU_DATETIME) lcd.print("- ");
    lcd.print("2. Datum & Zeit");
    lcd.setCursor(0, 2);
    if (currentMenu == MENU_TEMPERATURE) lcd.print("- ");
    lcd.print("3. Temperatur");
    lcd.setCursor(0, 3);
    if (currentMenu == MENU_HUMIDITY) lcd.print("- ");
    lcd.print("4. Luftfeuchtigkeit");
  } else {
    lcd.setCursor(0, 0);
    if (currentMenu == MENU_BRIGHTNESS) lcd.print("- ");
    lcd.print("5. Helligkeit");
  }
}

void displayMenuContent(MenuState menu) {
  lcd.clear();
  lcd.setCursor(0, 0);
  switch(menu) {
    case MENU_DASHBOARD:
      displayDashboard();
      break;
    case MENU_DATETIME:
      displayDateTime();
      break;
    case MENU_TEMPERATURE:
      displayTemperature();
      break;
    case MENU_HUMIDITY:
      displayHumidity();
      break;
    case MENU_BRIGHTNESS:
      displayBrightness();
      break;
  }
}

void displayDashboard() {
  lcd.clear();
  DateTime now = rtc.now();
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();

  lcd.setCursor(0, 0);
  lcd.print(now.hour(), DEC);
  lcd.print(':');
  lcd.print(now.minute(), DEC);
  lcd.print(':');
  lcd.print(now.second(), DEC);

  lcd.setCursor(0, 1);
  lcd.print("Temp: ");
  lcd.print(temperature);
  lcd.print(" C");

  lcd.setCursor(0, 2);
  lcd.print("Humidity: ");
  lcd.print(humidity);
  lcd.print(" %");

  lcd.setCursor(0, 3);
  lcd.print("Alarm: ");
  lcd.print(alarmTriggered ? "ON" : "OFF");
}

void displayDateTime() {
  DateTime now = rtc.now();
  lcd.print(now.year(), DEC);
  lcd.print('/');
  lcd.print(now.month(), DEC);
  lcd.print('/');
  lcd.print(now.day(), DEC);
  lcd.setCursor(0, 1);
  lcd.print(now.hour(), DEC);
  lcd.print(':');
  lcd.print(now.minute(), DEC);
  lcd.print(':');
  lcd.print(now.second(), DEC);
}

void displayTemperature() {
  float temperature = dht.readTemperature();
  lcd.print("Temp: ");
  lcd.print(temperature);
  lcd.print(" C");
}

void displayHumidity() {
  float humidity = dht.readHumidity();
  lcd.print("Humidity: ");
  lcd.print(humidity);
  lcd.print(" %");
}

void displayBrightness() {
  int brightness = analogRead(LDR_PIN);
  float voltage = brightness * (5.0 / 1023.0);
  float lux = (voltage / 5.0) * 1000; // Convert to lux assuming a 1k resistor
  lcd.print("Brightness: ");
  lcd.print(lux);
  lcd.print(" lux");
}

void checkAlarmConditions() {
  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();

  if (temperature > 50 || humidity > 70) {
    triggerAlarm(true);
  } else {
    triggerAlarm(false);
  }
}

void triggerAlarm(bool state) {
  alarmTriggered = state;

  if (state) {
    digitalWrite(LED_PIN, HIGH);
    for (int i = 0; i < LED_COUNT; i++) {
      ring.setPixelColor(i, ring.Color(255, 0, 0)); // Red color
    }
    ring.show();
  } else {
    digitalWrite(LED_PIN, LOW);
    for (int i = 0; i < LED_COUNT; i++) {
      ring.setPixelColor(i, ring.Color(0, 0, 0)); // Turn off
    }
    ring.show();
  }
}