#include <IRremote.h>

//Pin Definierung für die Relais.
const int Relay_1 = 8;
const int Relay_2 = 9;
const int Relay_3 = 10;
const int Relay_4 = 11;
const int Relay_5 = 12;
const int Relay_6 = 13;

//Pin Definierung für den Empfänger.
int receiver_pin = 2;
int btn_value = 0;

//Zeit Definierung 
unsigned long timer_value = 1000;

IRrecv receiver(receiver_pin);

delay(100);
digitalWrite(Relay_2, HIGH);
delay(500);
digitalWrite(Relay_2, LOW);


void setup() {
  Serial.begin(9600);
  receiver.enableIRIn();

}

void loop() {
  if (receiver.decode()){
    translateIR();
    receiver.resume();
  }

}

int translateIR(){
  btn_value = receiver.decodedIRData.command;
  Serial.println(btn_value);

if(btn_value == 162){
Serial.println("Power");
digitalWrite(Relay_2, LOW);
  }

  if(btn_value == 226){
   Serial.println("Menu");
    Serial.println("Press TEST to turn the LED ON");
    Serial.println("Press POWER to turn the LED OFF");
    Serial.println("Press 1 to blink the LED");
  }

  if(btn_value == 34){
    Serial.println("Test");
    digitalWrite(Relay_2, HIGH);
    delay(500);
    digitalWrite(Relay_2, LOW);
  }

  if(btn_value == 48){
    Serial.println("1");
    digitalWrite(Relay_2, HIGH);
    delay(timer_value);
    digitalWrite(Relay_2, LOW);
  }
}