#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include "DHT.h"

#define SCREEN_WIDTH 128
#define SCREEN_HEIGHT 64
#define OLED_RESET -1
#define SCREEN_ADDRESS 0x3C

Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

#define DHTPIN 5
#define DHTTYPE DHT22
DHT dht(DHTPIN, DHTTYPE);

int frame = 0;

void setup() {
  Serial.begin(9600);

  display.begin(SSD1306_SWITCHCAPVCC, 0x3c);
  display.clearDisplay();
  display.setTextSize(1);
  display.setTextColor(1);
  dht.begin();
  display.clearDisplay();
  }

void loop() {

  float KELEMBAPAN = dht.readHumidity();

  float SUHU = dht.readTemperature();


  display.setCursor(14, 6);
  display.drawRoundRect(6, 2, 110, 16, 23, WHITE);
  display.print("DHT MONETORING");

  display.setCursor(2, 23);
  display.print(F("suhu      : "));
  display.print(SUHU, 1);
  display.print(F(" C"));
  display.fillRoundRect(2, 35, SUHU, 4, 2, WHITE);
  display.drawRoundRect(2, 35, 110, 5, 23, WHITE);
  display.setCursor(2, 45);
  display.print("KELEMBAPAN:  ");
  display.print(KELEMBAPAN, 1);
  display.print(F(" %"));
  display.fillRoundRect(2, 58, KELEMBAPAN, 4, 2, WHITE);
  display.drawRoundRect(2, 58, 110, 5, 18, WHITE);
  display.display();
  display.clearDisplay();
}