#include "Adafruit_HX711.h"

// Define the pins for the HX711 communication
const uint8_t DATA_PIN = 4;  // Can use any pins!
const uint8_t CLOCK_PIN = 5; // Can use any pins!

float factor = 2000*9.81f/2101; //5kg Wiegezelle


Adafruit_HX711 hx711(DATA_PIN, CLOCK_PIN);

void setup() {
  Serial.begin(115200);

  // wait for serial port to connect. Needed for native USB port only
  while (!Serial) {
    delay(10);
  }

  Serial.println("Adafruit HX711 Test!");

  // Initialize the HX711
  hx711.begin();

  // read and toss 3 values each
  Serial.println("Tareing....");
  for (uint8_t t=0; t<3; t++) {
    hx711.tareA(hx711.readChannelRaw(CHAN_A_GAIN_128));
    hx711.tareA(hx711.readChannelRaw(CHAN_A_GAIN_128));
  }
} 

void loop() {
  // Read from Channel A with Gain 128, can also try CHAN_A_GAIN_64 or CHAN_B_GAIN_32
  // since the read is blocking this will not be more than 10 or 80 SPS (L or H switch)
  int32_t weightA128 = hx711.readChannelBlocking(CHAN_A_GAIN_128);
  Serial.print("Channel A (Gain 128): ");
  Serial.println(weightA128*factor);

delay(1000);
}