/*
  Example sketch to control a stepper motor with A4988 stepper motor driver, 
  AccelStepper library and Arduino: continuous rotation. 
  More info: https://www.makerguides.com 
*/

// Include the AccelStepper library:
#include "AccelStepper.h"

// Define stepper motor connections and motor interface type. 
// Motor interface type must be set to 1 when using a driver
#define dirPin 2
#define stepPin 3
#define motorInterfaceType 1
#define uppin 8
#define downpin 7
#define leduppin 9
#define leddownpin 6

// Create a new instance of the AccelStepper class:
AccelStepper stepper = AccelStepper(motorInterfaceType, stepPin, dirPin);

void setup() {

  pinMode(uppin,INPUT_PULLUP);
  pinMode(downpin,INPUT_PULLUP);
  pinMode(leduppin, OUTPUT);
  pinMode(leddownpin, OUTPUT);

  // Set the maximum speed in steps per second:
  stepper.setMaxSpeed(100);

}

void loop() {

  static int16_t sp=5;
 // Set the speed in steps per second:
  stepper.setSpeed(sp);
  // Step the motor with a constant speed as set by setSpeed():
  stepper.runSpeed();

  if(digitalRead(uppin) == LOW) {
    stepper.setSpeed(30);
    stepper.runSpeed();
  }

  if(digitalRead(downpin) == LOW) {
     sp = 1;
  }
  if(digitalRead(downpin) == HIGH) {
      sp = 5;
  }

//LEDEK

  if (digitalRead(uppin) == LOW) {
    digitalWrite(leduppin, HIGH);
  }
  else {
    digitalWrite(leduppin, LOW);
  }

  if (digitalRead(downpin) == LOW) {
    digitalWrite(leddownpin, HIGH);
  }
  else {
    digitalWrite(leddownpin, LOW);
  }
}