#include <ESP32Servo.h>

#define SERVO_PIN 18 


void setup() {
  Serial.begin(115200); 
  myServo.attach(SERVO_PIN); 
  Serial.println("Servo motor initialized");
}

void loop() {
  Serial.println("Moving servo to 0 degrees");
  myServo.write(0); 
  delay(1000); 

  Serial.println("Moving servo to 90 degrees");
  myServo.write(90);
  delay(1000);

  Serial.println("Moving servo to 180 degrees");
  myServo.write(180); 
  delay(1000); 
}