/*#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels

#define OLED_RESET    -1 // Reset pin # (or -1 if sharing Arduino reset pin)
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

void setup() {
  // initialize with the I2C addr 0x3C (for the 128x64)
  if(!display.begin(SSD1306_PAGEADDR, OLED_RESET)) {
    Serial.println(F("SSD1306 allocation failed"));
    for(;;); // Don't proceed, loop forever
  }


  else{
  Serial.println("Oled connected");
  display.display();
  delay(2000); // Pause for 2 seconds

  // Clear the buffer
  display.clearDisplay();

  // Display static text
  display.setTextSize(1);      // Normal 1:1 pixel scale
  display.setTextColor(SSD1306_WHITE); // Draw white text
  display.setCursor(0, 10);     // Start at top-left corner
  display.println(F("Hello, world!"));

  // Display text
  display.display();
  }
}

void loop() {
 Serial.println("Hello");
 delay(2000);
}
*/


#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
 #include "DHT.h"

const int DHT_PIN = 15;

DHT dhtSensor;


#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define OLED_RESET -1     // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32

Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

void setup() {
  Serial.begin(115200);
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);

  if (!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
    Serial.println(F("SSD1306 allocation failed"));
    for (;;) ;
  }
  
}

void loop() {
 
 TempAndHumidity  data = dhtSensor.getTempAndHumidity();
  Serial.println();
  Serial.println();
  



  display.clearDisplay();
  display.setTextSize(1);
  display.setTextColor(WHITE);
  display.setCursor(0, 10);
  display.println("Temp: " + String(data.temperature, 2) + "°C");
  display.setCursor(0, 12);
  display.println("Humidity: " + String(data.humidity, 1) + "%");
  display.display();
  delay(2000);
  display.clearDisplay();
  delay(3000);

}