#include "Arduino.h"
#include "Ticker.h"
#include <Wire.h>
#include <LiquidCrystal_I2C.h>
#define version "1.0.0"
Ticker tickerRedLED;
Ticker tickerBlueLED;
Ticker tickerBuilinLED;
LiquidCrystal_I2C lcd = LiquidCrystal_I2C(0x27, 16, 2);
/**************************************/
/* GPIO define */
/**************************************/
#define RXD2 16
#define TXD2 17
#define RXD3 27
#define TXD3 26
#define SW1 34
#define SW2 35
#define RELAY 25
#define LED_IO4 4
#define LED_IO12 12
#define SLID_SW 36
#define BUZZER 13
/**************************************/
/* Pre-define function */
/**************************************/
void Relay(bool state);
void RedLED(bool state);
void BlueLED(bool state);
void BuildinLED(bool state);
void buzzer_beep(int times);
bool Sw1(void);
bool Sw2(void);
bool Slid_sw(void);
void library_version(void);
void TickBlueLED_blink(void);
void TickRedLED_blink(void);
void TickBuildinLED_blink(void);
/***********************************************************************
* FUNCTION: Relay
* DESCRIPTION: Control ON-OFF Relay[pin25]
* PARAMETERS: 0 or 1
* RETURNED: nothing
***********************************************************************/
void Relay(bool state)
{
digitalWrite(RELAY, state);
}
/***********************************************************************
* FUNCTION: BlueLED
* DESCRIPTION: ON-OFF Blue LED[pin12]
* PARAMETERS: 0 or 11
* RETURNED: nothing
***********************************************************************/
void RedLED(bool state)
{
digitalWrite(LED_IO12, state);
}
/***********************************************************************
* FUNCTION: RedLED
* DESCRIPTION: ON-OFF Red LED[pin4]
* PARAMETERS: 0 or 1
* RETURNED: nothing
***********************************************************************/
void BlueLED(bool state)
{
digitalWrite(LED_IO4, state);
}
/***********************************************************************
* FUNCTION: BlueinLED
* DESCRIPTION: ON-OFF Bulidin LED[pin2]
* PARAMETERS: 0 or 1
* RETURNED: nothing
***********************************************************************/
void BuildinLED(bool state)
{
digitalWrite(LED_BUILTIN, state);
}
/***********************************************************************
* FUNCTION: buzzer_beep
* DESCRIPTION: buzzer sound beep[pin13]
* PARAMETERS: times
* RETURNED: nothing
***********************************************************************/
void buzzer_beep(int times)
{
#define PLUSE_BUZZER
// #define DC_BUZZER
for (int _i = 0; _i < times; _i++)
{
#ifdef PLUSE_BUZZER
#define dt 50 // 0.1sec
int _j;
for (_j = dt; _j > 0; _j--)
{
digitalWrite(BUZZER, HIGH);
vTaskDelay(1);
digitalWrite(BUZZER, LOW);
vTaskDelay(1);
}
vTaskDelay(100);
#endif
#ifdef DC_BUZZER
digitalWrite(BUZZER, HIGH);
vTaskDelay(70);
digitalWrite(BUZZER, LOW);
vTaskDelay(70);
#endif
}
}
/***********************************************************************
* FUNCTION: Sw1
* DESCRIPTION: Read SW1[pin33]
* PARAMETERS: nothing
* RETURNED: 0 or 1
***********************************************************************/
bool Sw1(void)
{
bool _status = !digitalRead(SW1);
return _status;
}
/***********************************************************************
* FUNCTION: Sw2
* DESCRIPTION: Read SW2[pin14]
* PARAMETERS: nothing
* RETURNED: 0 or 1
***********************************************************************/
bool Sw2(void)
{
bool _status = !digitalRead(SW2);
return _status;
}
/***********************************************************************
* FUNCTION: Slid_sw
* DESCRIPTION: Read Slid Switch[15]
* PARAMETERS: nothing
* RETURNED: 0 or 1
***********************************************************************/
bool Slid_sw(void)
{
bool _status = !digitalRead(SLID_SW);
return _status;
}
/***********************************************************************
* FUNCTION: TickBlueLED
* DESCRIPTION: Blink BlueLED[pin4]
* PARAMETERS: nothing
* RETURNED: 0 = Off, 1 < blink
***********************************************************************/
void TickBlueLED(float second)
{
if (second <= 0)
{
tickerBlueLED.detach();
BlueLED(0);
}
else
{
tickerBlueLED.attach(second, TickBlueLED_blink);
}
}
/***********************************************************************
* FUNCTION: TickRedLED
* DESCRIPTION: Blink RedLED[pin12]
* PARAMETERS: nothing
* RETURNED: 0 = Off, 1 < blink
***********************************************************************/
void TickRedLED(float second)
{
if (second <= 0)
{
tickerRedLED.detach();
RedLED(0);
}
else
{
tickerRedLED.attach(second, TickRedLED_blink);
}
}
/***********************************************************************
* FUNCTION: BuildinLED
* DESCRIPTION: Blink BuildinLED[pin2]
* PARAMETERS: nothing
* RETURNED: 0 = Off, 1 < blink
***********************************************************************/
void TickBuildinLED(float second)
{
if (second <= 0)
{
tickerBuilinLED.detach();
BuildinLED(0);
}
else
{
tickerBuilinLED.attach(second, TickBuildinLED_blink);
}
}
/***********************************************************************
* FUNCTION: TickBlueLED_blink
* DESCRIPTION: ON-OFF Red LED
* PARAMETERS: bool state
* RETURNED: nothing
***********************************************************************/
void TickBlueLED_blink(void){
bool _state = digitalRead(LED_IO4);
digitalWrite(LED_IO4, !_state);
}
/***********************************************************************
* FUNCTION: TickRedLED_blink
* DESCRIPTION: ON-OFF Red LED
* PARAMETERS: bool state
* RETURNED: nothing
***********************************************************************/
void TickRedLED_blink(void){
bool _state = digitalRead(LED_IO12);
digitalWrite(LED_IO12, !_state);
}
/***********************************************************************
* FUNCTION: void TickBuildinLED_blink(void){
* DESCRIPTION: ON-OFF Buildin LED
* PARAMETERS: bool state
* RETURNED: nothing
***********************************************************************/
void TickBuildinLED_blink(void){
bool _state = digitalRead(BUILTIN_LED);
digitalWrite(BUILTIN_LED, !_state);
}
/**************************************/
/* Header project */
/**************************************/
void header_print(void)
{
Serial.printf("\r\n***********************************************************************\r\n");
Serial.printf("* Project : tiny32_v4_wokwi_vscode\r\n");
Serial.printf("* Description : this code is template source code useful for tiny32_v3 and tiny32_v4 \r\n");
Serial.printf("* hardware simulate run with wokwi simulate, it works with vscode \r\n");
Serial.printf("* Hardware : tiny32_v4 \r\n");
Serial.printf("* Author : Tenergy Innovation Co., Ltd.\r\n");
Serial.printf("* Date : 19/06/2023\r\n");
Serial.printf("* Revision : %s\r\n", version);
Serial.printf("* Rev1.0 : Origital\r\n");
Serial.printf("* website : http://www.tenergyinnovation.co.th\r\n");
Serial.printf("* Email : [email protected]\r\n");
Serial.printf("* TEL : +66 82-308-3299\r\n");
Serial.printf("***********************************************************************/\r\n");
}
/***********************************************************************
* FUNCTION: setup
* DESCRIPTION: setup process
* PARAMETERS: nothing
* RETURNED: nothing
***********************************************************************/
void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
pinMode(SW1, INPUT);
pinMode(SW2, INPUT);
pinMode(SLID_SW, INPUT);
pinMode(LED_BUILTIN, OUTPUT);
pinMode(LED_IO12, OUTPUT);
pinMode(LED_IO4, OUTPUT);
pinMode(RELAY, OUTPUT);
pinMode(BUZZER, OUTPUT);
digitalWrite(LED_BUILTIN, LOW);
digitalWrite(LED_IO12, LOW);
digitalWrite(LED_IO4, LOW);
digitalWrite(BUZZER, LOW);
lcd.init(); // initialize the lcd
lcd.backlight();
lcd.setCursor(0,0);
lcd.print("* TENERGY *");
lcd.setCursor(0,1);
lcd.print("* INNOVATION *");
header_print();
buzzer_beep(2);
TickBuildinLED(0.5);
TickRedLED(1.0);
TickBlueLED(1.5);
}
/***********************************************************************
* FUNCTION: loop
* DESCRIPTION: loop process
* PARAMETERS: nothing
* RETURNED: nothing
***********************************************************************/
void loop() {
// put your main code here, to run repeatedly:
if(Sw1())
{
buzzer_beep(1);
while(Sw1());
Serial.printf("SW1 is pressed\r\n");
}
if(Sw2())
{
buzzer_beep(1);
while(Sw2());
Serial.printf("SW2 is pressed\r\n");
}
delay(10); // this speeds up the simulation
}