#include <Servo.h>
Servo myservo;
int angle;
void setup() {
  Serial.begin(9600);
myservo.attach(3);

pinMode(A2, INPUT);
pinMode(3, OUTPUT);

}
void loop (){
  int ldrV =analogRead(A2);
  Serial.print("LDR Value =");
  Serial.println(ldrV);
  delay(2000);
  angle = ldrV/5;
  myservo.write(angle);
  Serial.print("Angle is :");
  Serial.println(angle);
 
}