#include <LiquidCrystal_I2C.h>

#define LCD_ADDR 0x27
#define LCD_COLUMNS 16
#define LCD_ROWS 2

LiquidCrystal_I2C lcd(LCD_ADDR, LCD_COLUMNS, LCD_ROWS);
int red =4;
int yellow =5;
int cyan =6;
int purple =7;
int green =8;

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);

  pinMode(red, OUTPUT);
  pinMode(yellow, OUTPUT);
  pinMode(cyan, OUTPUT);
  pinMode(purple, OUTPUT);
  pinMode(green, OUTPUT);

  lcd.begin(16,2);
  lcd.init();
  lcd.backlight();

  lcd.setCursor(5,0);
  lcd.print("hola");

  lcd.setCursor(1,1);
  lcd.print("electronica 1");
  delay(2500);

  lcd.clear();
}


void loop() {
  // put your main code here, to run repeatedly:
  lcd.setCursor(0,0);
  lcd.print("PROYECTO NUM 10");

  lcd.setCursor(3,1);
  lcd.print("PATRON 1");

  digitalWrite(red, HIGH);
  delay(500);
  digitalWrite(yellow, HIGH);
  delay(500);
  digitalWrite(cyan, HIGH);
  delay(500);
  digitalWrite(purple, HIGH);
  delay(500);
  digitalWrite(green, HIGH);
  delay(500);
lcd.clear();

lcd.setCursor(0,0);
  lcd.print("--ALEXANDER--");
  lcd.setCursor(3,1);
  lcd.print("PATRON 2");

  digitalWrite(red, LOW);
  delay(500);
  digitalWrite(yellow, LOW);
  delay(500);
  digitalWrite(cyan, LOW);
  delay(500);
  digitalWrite(purple, LOW);
  delay(500);
  digitalWrite(green, LOW);
  delay(500);
lcd.clear();

lcd.setCursor(0,0);
  lcd.print("--MONTANO--");
  lcd.setCursor(3,1);
  lcd.print("PATRON 3");

  digitalWrite(red, HIGH);
  delay(500);
  digitalWrite(yellow, HIGH);
  delay(500);
  digitalWrite(cyan, LOW);
  
  digitalWrite(purple, HIGH);
  delay(500);
  digitalWrite(green, HIGH);
  delay(500);
lcd.clear();

lcd.setCursor(0,0);
  lcd.print("--GONZALES--");
  lcd.setCursor(3,1);
  lcd.print("PATRON 4");

  digitalWrite(red, LOW);
  delay(500);
  digitalWrite(yellow, LOW);
  delay(500);
  digitalWrite(cyan, HIGH);
  delay(500);
  digitalWrite(purple, LOW);
  delay(500);
  digitalWrite(green, LOW);
  delay(500);
lcd.clear();


lcd.setCursor(0,0);
  lcd.print("ELECTRONICA ");
  lcd.setCursor(3,1);
  lcd.print("PRUEBA 5");

  digitalWrite(red, HIGH);
  delay(500);
  digitalWrite(yellow, LOW);
  delay(500);
  digitalWrite(cyan, HIGH);
  delay(500);
  digitalWrite(purple, LOW);
  delay(500);
  digitalWrite(green, HIGH);
  delay(500);
lcd.clear();

lcd.setCursor(0,0);
  lcd.print("5TO SEMESTRE");
  lcd.setCursor(3,1);
  lcd.print("PATRON 6");

  digitalWrite(red, LOW);
  delay(500);
  digitalWrite(yellow, HIGH);
  delay(1000);
  digitalWrite(cyan, LOW);
  delay(500);
  digitalWrite(purple, HIGH);
  delay(1000);
  digitalWrite(green, LOW);
  delay(500);


}