/*************************************************************

  This is a simple demo of sending and receiving some data.
  Be sure to check out other examples!
 *************************************************************/

/* Fill-in information from Blynk Device Info here */
#define BLYNK_TEMPLATE_ID           "TMPL45i6bTJr4"
#define BLYNK_TEMPLATE_NAME         "Quickstart Template"
#define BLYNK_AUTH_TOKEN            "fcd7oMVJdb-R89jmcwTk7MRH3kvzr1IZ"

/* Comment this out to disable prints and save space */
#define BLYNK_PRINT Serial

#include <ESP32Servo.h>
#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "Wokwi-GUEST";
char pass[] = "";

const int LED = 2;
BlynkTimer timer;
Servo servo_13;
// This function is called every time the Virtual Pin 0 state changes
BLYNK_WRITE(V0){
  // Set incoming value from pin V0 to a variable
  int value = param.asInt();
if (value == 1) {
   digitalWrite (27, HIGH);
   servo_13.write(20);
 }
else{
  digitalWrite (27, LOW);
   servo_13.write(120);
 }


  // Update state
  Blynk.virtualWrite(V1, value);
}

BLYNK_WRITE(V4){

int value = param.asInt();
Serial.println(value);

servo_13.write(value);
digitalWrite (27, HIGH);
delay(1000);
digitalWrite (27, LOW);

}


// This function is called every time the device is connected to the Blynk.Cloud
BLYNK_CONNECTED()
{
  // Change Web Link Button message to "Congratulations!"
  Blynk.setProperty(V3, "offImageUrl", "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations.png");
  Blynk.setProperty(V3, "onImageUrl",  "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations_pressed.png");
  Blynk.setProperty(V3, "url", "https://docs.blynk.io/en/getting-started/what-do-i-need-to-blynk/how-quickstart-device-was-made");
}

// This function sends Arduino's uptime every second to Virtual Pin 2.
void myTimerEvent()
{
  // You can send any value at any time.
  // Please don't send more that 10 values per second.
  Blynk.virtualWrite(V2, millis() / 1000);
}

void setup()
{
  pinMode(2,OUTPUT);
  servo_13.attach(13);
  // Debug console
  Serial.begin(115200);
  
 pinMode (27, OUTPUT);
  Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass);
  // You can also specify server:
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, "blynk.cloud", 80);
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, IPAddress(192,168,1,100), 8080);

  // Setup a function to be called every second
  timer.setInterval(1000L, myTimerEvent);
}

void loop()
{
  delay(1000);
  digitalWrite(2, HIGH);
  delay(1000);
  digitalWrite(2, LOW);
  delay(1000);
  servo_13.write(90);
  Blynk.run();
  timer.run();
  
}